16" Thick - HSS - Multi-Tool Blade

Item #: FM50DB69
Manufacturer: APT
Mfg #: DB69

Technical Specifications:
•Blade Thickness: 3/16 •Brand Name: APT •Material: High Speed Steel •Size: 2-5/32 •Type: Multi-Tool Blade

Description:
•MULTI-TOOL SYSTEM •D SERIES Standard Blades High Speed Steel (3/16 Thick) For Use In D Series Pilot-Holders •The MULTI-TOOL system is the only inexpensive method of large diameter hole production (up to 6-1/4 ) on light duty, low horsepower equipment - some -examples: Bridgeport milling machines, lathes, drill presses and portable magnetic drills. In addition, you can spot face, counterbore or, with simple blade -modification, produce special hole configurations with multi-diameters. NOW every tool room, repair shop and production department can afford to have large diameter hole capacity tools on hand.Blades are inexpensive, and stocked standard. Manufactured in a wide variety of shank styles.

Shipping Info:
•Actual Weight - .1020

$43.22

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Use with 3/16" Thick Blades - R8 SH - Multi-Toolholder

Item #: FM50DHR8
Manufacturer: APT
Mfg #: DHR8

Technical Specifications:
•Blade Thickness: 3/16 •Brand Name: APT •Comments: R8 Shank •Overall Length: 8-1/4 •Pilot Diameter: 3/4 •Type: Multi-Tool Holder

Description:
•Use with 3/16" thick blades

Shipping Info:
•Actual Weight - 1.3460

$149.00

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

#CEB66 - 2-1/16" x 1/4" Thick - Cobalt - Multi-Tool Blade

Item #: FM50CEB66
Manufacturer: APT
Mfg #: CEB66

Technical Specifications:
•Blade Thickness: 1/4 •Brand Name: APT •Material: Cobalt •Size: 2-1/16 •Type: Multi-Tool Blade

Description:
•The only inexpensive method of large diameter hole production (up to 6-1/4 ) on light duty, low horsepower equipment - some -examples: Bridgeport milling machines, lathes, drill presses and portable magnetic drills •You can spot face, counterbore or, with simple blade -modification, produce special hole configurations with multi-diameters •Now every tool room, repair shop and production department can afford to have large diameter hole capacity tools on hand •Blades are inexpensive, and stocked standard •Sizes 2-1/16" and larger require auxiliary pilot

Shipping Info:
•Actual Weight - .1240

$65.75

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Use with 1/4" Thick Blades - 1/2" Reduced SH - Multi-Toolholder

Item #: FM50EH1
Manufacturer: APT
Mfg #: EH1

Technical Specifications:
•Blade Thickness: 1/4 •Brand Name: APT •Comments: 1/2" Reduced Shank •Overall Length: 6 •Pilot Diameter: 1 •Type: Multi-Tool Holder

Description:
•MULTI-TOOL •Holders

Shipping Info:
•Actual Weight - .3000

$126.69

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

#DX15 - 1-1/2 For use with 1/4'' Thick Blades - Multi-Tool Auxiliary Pilot

Item #: FM50DX15
Manufacturer: APT
Mfg #: DX15

Technical Specifications:
•Blade Thickness: 1/4 •Brand Name: APT •Description: 1-17/32 - 2 •Size: 1-1/2 •Type: Multi-Tool Auxiliary Pilot

Description:
•For use with 1/4'' thick blades

Shipping Info:
•Actual Weight - .4460

$32.02

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

#DB30 - 15/16" x 3/16" Thick - HSS - Multi-Tool Blade

Item #: FM50DB30
Manufacturer: APT
Mfg #: DB30

Technical Specifications:
•Blade Thickness: 3/16 •Brand Name: APT •Material: High Speed Steel •Size: 15/16 •Type: Multi-Tool Blade

Description:
•MULTI-TOOL SYSTEM •D SERIES Standard Blades High Speed Steel (3/16 Thick) For Use In D Series Pilot-Holders •The MULTI-TOOL system is the only inexpensive method of large diameter hole production (up to 6-1/4 ) on light duty, low horsepower equipment - some -examples: Bridgeport milling machines, lathes, drill presses and portable magnetic drills. In addition, you can spot face, counterbore or, with simple blade -modification, produce special hole configurations with multi-diameters. NOW every tool room, repair shop and production department can afford to have large diameter hole capacity tools on hand.Blades are inexpensive, and stocked standard. Manufactured in a wide variety of shank styles.

Shipping Info:
•Actual Weight - .0400

$26.29

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

#DX20 - 2 For use with 3/16'' Thick Blades - Multi-Tool Auxiliary Pilot

Item #: FM50DX20
Manufacturer: APT
Mfg #: DX20

Technical Specifications:
•Blade Thickness: 3/16 •Brand Name: APT •Description: 2-1/32 - 2-1/2 •Size: 2 •Type: Multi-Tool Auxiliary Pilot

Description:
•For use with 3/16'' thick blades

Shipping Info:
•Actual Weight - .8100

$35.05

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Use with 3/16" Thick Blades - 3/4" Lathe SH - Multi-Toolholder

Item #: FM50DHS23
Manufacturer: APT
Mfg #: DHS23

Technical Specifications:
•Blade Thickness: 3/16 •Brand Name: APT •Comments: 3/4" Lathe Shank •Overall Length: 7-1/2 •Pilot Diameter: 3/4 •Type: Multi-Tool Holder

Description:
•Use with 3/16" thick blades

Shipping Info:
•Actual Weight - .8400

$104.40

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1-1/8 - 2 x 1/4" HSS Blades - 1/2" Reduced SH - Multi-Tool Set

Item #: FM50ES1
Manufacturer: APT
Mfg #: ES1

Technical Specifications:
•Blade Thickness: 1/4 •Brand Name: APT •Comments: 1/2" Reduced Shank Holder •Material: High Speed Steel •Size: 1-1/8 to 2" •Type: Multi-Tool Set

Description:
•multi-tool Sets •Heavy Duty E Series SETS •1/2" Reduced Shank SetHigh speed steel or Cobalt Blades •EH1 - 1Piloted Holder, 1/2 Shank •1H.S. Silver and Deming 1/2 Shank •#6 Combination Drill and Countersink (Above tools are 6overall for quick, single set up) •Hex Wrenches •E Series Blades - 1 each: 1-1/8, 1-3/16, 1-1/4, 1-5/16, 1-3/8,1-7/16, 1-1/2, 1-5/8, 1-3/4, 1-7/8 & 2

Shipping Info:
•Actual Weight - 3.5000

$462.94

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

#DB71 - 2-7/32" x 3/16" Thick - HSS - Multi-Tool Blade

Item #: FM50DB71
Manufacturer: APT
Mfg #: DB71

Technical Specifications:
•Blade Thickness: 3/16 •Brand Name: APT •Material: High Speed Steel •Size: 2-7/32 •Type: Multi-Tool Blade

Description:
•MULTI-TOOL SYSTEM •D SERIES Standard Blades High Speed Steel (3/16 Thick) For Use In D Series Pilot-Holders •The MULTI-TOOL system is the only inexpensive method of large diameter hole production (up to 6-1/4 ) on light duty, low horsepower equipment - some -examples: Bridgeport milling machines, lathes, drill presses and portable magnetic drills. In addition, you can spot face, counterbore or, with simple blade -modification, produce special hole configurations with multi-diameters. NOW every tool room, repair shop and production department can afford to have large diameter hole capacity tools on hand.Blades are inexpensive, and stocked standard. Manufactured in a wide variety of shank styles.

Shipping Info:
•Actual Weight - .1120

$43.79

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

#EBS192 - 6" x 1/4" Thick - HSS - Multi-Tool Blade

Item #: FM50EBS192
Manufacturer: APT
Mfg #: EBS192

Technical Specifications:
•Blade Thickness: 1/4 •Brand Name: APT •Material: High Speed Steel •Size: 6 •Type: Multi-Tool Blade

Description:
•S-Type Blades •For Use with "E" Series Holders •The S-Type Blade is held with a special spring loaded set screw, producing a floating action which adjusts to uneven work surfaces or small misalignments between spindle and workpiece. If depth of cut is greater than 1/2 , advance piloted holder through the pilot hole and insert blade in an upward orientation. Reverse spindle and feed in upward cutting direction to maximum blade depth. Remove blade, withdraw pilot holder and reinsert blade in downward cutting position with right hand rotation and complete cut to break through. •High Speed Steel •Effective in Steel up to 1/2" Thick (up to 1" if cut from both sides) •Can be used on Low Horsepower Portable Magnetic or Fixed Machine Drilling •Adjusts to uneven work surfaces and small misalignments •Not Recommended for use in Flatted Lathe Piloted Holders.

Shipping Info:
•Actual Weight - .3660

$124.81

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

#EBP10 - 1'' - Multi-Tool Pilot Drill

Item #: FM50EBP10
Manufacturer: APT
Mfg #: EBP10

Technical Specifications:
•Brand Name: APT •Comments: 2-1/4 •Overall Length: 3 •Size: 1 for E Series Holders •Type: Multi-Tool Pilot Drill

Description:
•MULTI-TOOLPilot Drills •This threaded shank drill allows single positioning, one pass operation of the MULTI-TOOL. If spindle travel is not sufficient or if the work piece configuration does not allow clearance for the drill, the drill may be unscrewed after hole drilling and the hole finished with the blade holder portion in a second pass without repositioning. NOTE:A special short projection blade set screw will be furnished at no charge with each drill, which must be used in the blade holder to allow full seating of the threaded drill shank.

Shipping Info:
•Actual Weight - .3660

$87.39

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

#EBS168 - 5-1/4" x 1/4" Thick - HSS - Multi-Tool Blade

Item #: FM50EBS168
Manufacturer: APT
Mfg #: EBS168

Technical Specifications:
•Blade Thickness: 1/4 •Brand Name: APT •Material: High Speed Steel •Size: 5-1/4 •Type: Multi-Tool Blade

Description:
•S-Type Blades •For Use with "E" Series Holders •The S-Type Blade is held with a special spring loaded set screw, producing a floating action which adjusts to uneven work surfaces or small misalignments between spindle and workpiece. If depth of cut is greater than 1/2 , advance piloted holder through the pilot hole and insert blade in an upward orientation. Reverse spindle and feed in upward cutting direction to maximum blade depth. Remove blade, withdraw pilot holder and reinsert blade in downward cutting position with right hand rotation and complete cut to break through. •High Speed Steel •Effective in Steel up to 1/2" Thick (up to 1" if cut from both sides) •Can be used on Low Horsepower Portable Magnetic or Fixed Machine Drilling •Adjusts to uneven work surfaces and small misalignments •Not Recommended for use in Flatted Lathe Piloted Holders.

Shipping Info:
•Actual Weight - .3220

$104.96

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

#CEB38 - 1-3/16" x 1/4" Thick - Cobalt - Multi-Tool Blade

Item #: FM50CEB38
Manufacturer: APT
Mfg #: CEB38

Technical Specifications:
•Blade Thickness: 1/4 •Brand Name: APT •Material: Cobalt •Size: 1-3/16 •Type: Multi-Tool Blade

Description:
•The only inexpensive method of large diameter hole production (up to 6-1/4 ) on light duty, low horsepower equipment - some -examples: Bridgeport milling machines, lathes, drill presses and portable magnetic drills •You can spot face, counterbore or, with simple blade -modification, produce special hole configurations with multi-diameters •Now every tool room, repair shop and production department can afford to have large diameter hole capacity tools on hand •Blades are inexpensive, and stocked standard •Sizes 2-1/16" and larger require auxiliary pilot

Shipping Info:
•Actual Weight - .0720

$46.63

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

#DB59 - 1-27/32" x 3/16" Thick - HSS - Multi-Tool Blade

Item #: FM50DB59
Manufacturer: APT
Mfg #: DB59

Technical Specifications:
•Blade Thickness: 3/16 •Brand Name: APT •Material: High Speed Steel •Size: 1-27/32 •Type: Multi-Tool Blade

Description:
•MULTI-TOOL SYSTEM •D SERIES Standard Blades High Speed Steel (3/16 Thick) For Use In D Series Pilot-Holders •The MULTI-TOOL system is the only inexpensive method of large diameter hole production (up to 6-1/4 ) on light duty, low horsepower equipment - some -examples: Bridgeport milling machines, lathes, drill presses and portable magnetic drills. In addition, you can spot face, counterbore or, with simple blade -modification, produce special hole configurations with multi-diameters. NOW every tool room, repair shop and production department can afford to have large diameter hole capacity tools on hand.Blades are inexpensive, and stocked standard. Manufactured in a wide variety of shank styles.

Shipping Info:
•Actual Weight - .0840

$36.60

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

#EBS128 - 4" x 1/4" Thick - HSS - Multi-Tool Blade

Item #: FM50EBS128
Manufacturer: APT
Mfg #: EBS128

Technical Specifications:
•Blade Thickness: 1/4 •Brand Name: APT •Material: High Speed Steel •Size: 4 •Type: Multi-Tool Blade

Description:
•S-Type Blades •For Use with "E" Series Holders •The S-Type Blade is held with a special spring loaded set screw, producing a floating action which adjusts to uneven work surfaces or small misalignments between spindle and workpiece. If depth of cut is greater than 1/2 , advance piloted holder through the pilot hole and insert blade in an upward orientation. Reverse spindle and feed in upward cutting direction to maximum blade depth. Remove blade, withdraw pilot holder and reinsert blade in downward cutting position with right hand rotation and complete cut to break through. •High Speed Steel •Effective in Steel up to 1/2" Thick (up to 1" if cut from both sides) •Can be used on Low Horsepower Portable Magnetic or Fixed Machine Drilling •Adjusts to uneven work surfaces and small misalignments •Not Recommended for use in Flatted Lathe Piloted Holders.

Shipping Info:
•Actual Weight - .2460

$111.76

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

#DB315 - 63/64" x 3/16" Thick - HSS - Multi-Tool Blade

Item #: FM50DB315
Manufacturer: APT
Mfg #: DB315

Technical Specifications:
•Blade Thickness: 3/16 •Brand Name: APT •Material: High Speed Steel •Size: 63/64 •Type: Multi-Tool Blade

Description:
•MULTI-TOOL SYSTEM •D SERIES Standard Blades High Speed Steel (3/16 Thick) For Use In D Series Pilot-Holders •The MULTI-TOOL system is the only inexpensive method of large diameter hole production (up to 6-1/4 ) on light duty, low horsepower equipment - some -examples: Bridgeport milling machines, lathes, drill presses and portable magnetic drills. In addition, you can spot face, counterbore or, with simple blade -modification, produce special hole configurations with multi-diameters. NOW every tool room, repair shop and production department can afford to have large diameter hole capacity tools on hand.Blades are inexpensive, and stocked standard. Manufactured in a wide variety of shank styles.

Shipping Info:
•Actual Weight - .0440

$27.61

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

#EB100 - 3-1/8" x 1/4" Thick - HSS - Multi-Tool Blade

Item #: FM50EB100
Manufacturer: APT
Mfg #: EB100

Technical Specifications:
•Blade Thickness: 1/4 •Brand Name: APT •Material: High Speed Steel •Size: 3-1/8 •Type: Multi-Tool Blade

Description:
•The only inexpensive method of large diameter hole production (up to 6-1/4 ) on light duty, low horsepower equipment - some -examples: Bridgeport milling machines, lathes, drill presses and portable magnetic drills •You can spot face, counterbore or, with simple blade -modification, produce special hole configurations with multi-diameters •Now every tool room, repair shop and production department can afford to have large diameter hole capacity tools on hand •Blades are inexpensive, and stocked standard •Sizes 2-1/16" and larger require auxiliary pilot

Shipping Info:
•Actual Weight - .2000 •Dimensions - Height: .250 Length: 5.00 Width: 2.00

$60.37

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

#EH3TL - For use with 1/4'' Thick Blades - 3 MT SH-Long - Multi-Toolholder

Item #: FM50EH3TL
Manufacturer: APT
Mfg #: EH3TL

Technical Specifications:
•Blade Thickness: 1/4 •Brand Name: APT •Comments: 3 MT Shank-Long •Overall Length: 16 •Pilot Diameter: 1 •Type: Multi-Tool Holder

Description:
•MULTI-TOOL •Holders

Shipping Info:
•Actual Weight - 1.6800

$190.16

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

#EB62 - 1-15/16" x 1/4" Thick - HSS - Multi-Tool Blade

Item #: FM50EB62
Manufacturer: APT
Mfg #: EB62

Technical Specifications:
•Blade Thickness: 1/4 •Brand Name: APT •Material: High Speed Steel •Size: 1-15/16 •Type: Multi-Tool Blade

Description:
•The only inexpensive method of large diameter hole production (up to 6-1/4 ) on light duty, low horsepower equipment - some -examples: Bridgeport milling machines, lathes, drill presses and portable magnetic drills •You can spot face, counterbore or, with simple blade -modification, produce special hole configurations with multi-diameters •Now every tool room, repair shop and production department can afford to have large diameter hole capacity tools on hand •Blades are inexpensive, and stocked standard •Sizes 2-1/16" and larger require auxiliary pilot

Shipping Info:
•Actual Weight - .1180

$41.73

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It