3520C LATHE 2HP 1/3PH 230V

Item #: PX501353001
Manufacturer:
Mfg #:

Technical Specifications:

Description:

Shipping Info:
•Commercial Truck - Call for Shipping Charges

$5,404.40

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Bench Lathe - #M1016 9-3/4'' Swing; 21'' Between Centers; 3/4HP; 1PH; 110V Motor

Item #: PY65M1016
Manufacturer: Shop Fox
Mfg #: M1016

Technical Specifications:
•Brand Name: Shop Fox •Cross slide travel: 4-1/4 •Distance Between Centers: 21 •Model Number: M1016 •Motor: 3/4HP, 110V, 1PH •Mount: 3MT •Spindle Hole Diameter: 3/4 •Spindle Speed (RPM): (6) 150-2400 •Spindle Taper: 3MT •Swing: 9-3/4 •Type: Bench Lathe •Weight: 353 lbs

Description:
•SPECIFICATIONS: Lathe motor size: 3/4 HP, 110V, 1 Ph Motor speed: 1,725 RPM Swing: 9-3/4" Swing over cross slide: 6" Distance between centers: 21" Spindle bore: 3/4" Spindle taper: MT 3 Tailstock taper: MT 2 Tailstock barrel travel: 1/2" Cross slide travel: 4-1/4" Compound travel: 2-1/4" Speeds: (6) 150-2,400 RPM Range of threads (inches): 8 TPI - 40 TPI in 12 steps (Gear changes required) Range of threads (metric): 12 0.4 - 3.0mm Net weight: 353 lbs. •STANDARD EQUIPMENT: 5" 3-jaw chuck Cross slide table 11 change gears 2 dead centers 4-way turret tool post Eye shield Forward/reverse switch with emergency stop •2 Year Warranty •F.O.B. Factory

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 353.0000

$2,504.64

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

BDB-929 BELT DRIVE BENCH LATHE

Item #: PY60321379
Manufacturer: Jet
Mfg #: 321379

Technical Specifications:
•Brand Name: Jet •Cross slide travel: 4-1/4 •Distance Between Centers: 27-1/2 •Model Number: BDB-929 •Motor: 3/4HP, 115V, 1PH •Mount: 1-1/2 x 8 TPI •Spindle Hole Diameter: 3/4 •Spindle Speed (RPM): 130-2000 •Spindle Taper: 3MT •Swing: 8-3/4 •Type: Belt Drive Bench Lathe •Weight: 287 lbs

Description:
Features: Induction hardened and ground bedway •Safety on/off switch •Emergency stop •Chuck Guard •Quick change gearbox •Power longitudinal feed allows threading and reverse threadng •Quick locking tailstock •Standard 1-1/2" x 8 TPI spindle mount •Reversing switch •Full length splash guard •2 Year Warranty •Standard Equipment:•4" 3-Jaw Chuck •7-1/2" 4-Jaw Chuck •7" Face Plate •Steady and Follow Rest •4-Way Toolpost •Set of Tools •MT-2 & MT-3 Centers

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 337.0000

$3,873.84

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

8" x 12" Bench Lathe 115V, 1PH

Item #: JB559684508
Manufacturer: Palmgren
Mfg #: 9684508

Technical Specifications:
•Brand Name: Palmgren •Cross slide travel: 4 •Distance Between Centers: 12 •Model Number: TU2004V •Motor: 7/8HP, 115V, 1PH •Mount: 3MT •Spindle Speed (RPM): 150-2500 •Spindle Taper: 3MT •Swing: 8 •Type: Bench Lathe •Weight: 165 lbs

Description:
•Palmgren's 8" bench model engine lathe delivers the precision, power and versatility to handle a wide range of turning operations normally found in much larger machines •Heavy cast construction, smooth power transmission with helical gears, hardened and ground ways all designed to give you years of trouble-free, precise turning •All Palmgren lathes are built and inspected to the DIN 8606 toolmakers precision lathe standard assuring accuracy and consistent performance •The bench lathe is the right choice for turning small metal parts and is used in proto type shops, home machinists, jewelry manufacturing, tool rooms, fabrication shops and maintenance shops •EACH LATHE COMES STANDARD WITH: 3 jaw lathe chuck, Safety chuck and tool post guards, 4 way tool post, Centers, Chip tray, Precision thrust and ball bearings in the head stock •3 Year Warranty

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 165.0000

$2,525.80

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

10" x 21" Bench Lathe 115V, 1PH

Item #: JB559684509
Manufacturer: Palmgren
Mfg #: 9684509

Technical Specifications:
•Brand Name: Palmgren •Cross slide travel: 4-3/4 •Distance Between Centers: 21-5/8 •Model Number: TU2506 •Motor: 1HP, 115V, 1PH •Mount: 4MT •Spindle Speed (RPM): 150-2400 •Spindle Taper: 4MT •Swing: 10 •Type: Bench Lathe •Weight: 343 lbs

Description:
•Palmgren's 10" bench model engine lathe delivers the precision, power and versatility to handle a wide range of turning operations normally found in much larger machines •Heavy cast construction, smooth power transmission with helical gears, hardened and ground ways all designed to give you years of trouble-free, precise turning •All Palmgren lathes are built and inspected to the DIN 8606 toolmakers precision lathe standard assuring accuracy and consistent performance •The bench lathe is the right choice for turning small metal parts and is used in proto type shops, home machinists, jewelry manufacturing, tool rooms, fabrication shops and maintenance shops •EACH LATHE COMES STANDARD WITH: 3 jaw lathe chuck, Safety chuck and tool post guards, 4 way tool post, Centers, Chip tray, Precision thrust and ball bearings in the head stock •3 Year Warranty

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 343.0000

$3,719.87

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

BDB-1340A, With Taper Attachment and Collet Closer

Item #: PY60321112
Manufacturer: Jet
Mfg #: 321112

Technical Specifications:
•Brand Name: Jet •Carriage Travel (in.): 35 •Compound Slide Travel (in.): 2-11/16 •Cross slide travel: 6-5/16 •Distance Between Centers: 40 •Follow Rest Capacity (in.): 2-3/4 •Inch Pitch Threads: (38) 3-1/2-80 TPI •Length of Gap (in.): 8 •Max. Tool Size (in.): 5/8 x 5/8 •Metric Pitch Threads: (23) .45-10 •Model Number: BDB-1340A •Motor: 2HP, 230V, 1PH •Overall Dimensions: 71 x 32 x 45 •Range of Cross Feeds (IPR): .0006 - .013 •Range of Longitudinal Feeds (IPR): .0018 - .0374 •Spindle Bore (in.): 1-3/8 •Spindle Speeds: (12) 60-1240 RPM •Spindle Type: D1-4 •Steady Rest Capacity (in.): 2-5/8 •Style: SV_1375591258793 •Swing: 13 •Swing over crosslide: 7-25/32 •Swing over gap: 18-3/4 •Tailstock Spindle Travel (in.): 3-3/4 •Tailstock Taper: 3MT •Weight: 1175 lbs •Width of Bed (in.): 7-3/8

Description:
•JET Belt Drive Bench Lathes feature an enclosed gearbox with helical cut gears for noise reduction and smooth operation •The full length splash guard on all sizes prevents hot chips and fluid from contaminating the work area and the quick change gearbox allows for fast and easy gear changes for metric threading •One of the most popular JET lathes now comes with an enclosed gearbox as a standard feature •Enclosed gearbox design provides smooth, quiet operation •Fast, easy speed changes •Low voltage motor controls •Helical cut headstock gears reudce noise •Change gears allow metric threading •Spindle is supported by precision tapered roller bearings •V-way bed is induction hardened and ground •Gap bed section provided for large diameter work •Independent leadscrew and feed rod •2 Year Warranty

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 1200.0000

$13,102.13

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

BDB-919 BELT DRIVE BENCH LATHE

Item #: PY60321378
Manufacturer: Jet
Mfg #: 321378

Technical Specifications:
•Brand Name: Jet •Cross slide travel: 4-1/4 •Distance Between Centers: 18 •Model Number: BDB-919 •Motor: 3/4HP, 115V, 1PH •Mount: 1-1/2 x 8 TPI •Spindle Hole Diameter: 3/4 •Spindle Speed (RPM): 130-2000 •Spindle Taper: 3MT •Swing: 8-3/4 •Type: Belt Drive Bench Lathe •Weight: 250 lbs

Description:
Features: Induction hardened and ground bedway •Safety on/off switch •Emergency stop •Chuck Guard •Quick change gearbox •Power longitudinal feed allows threading and reverse threadng •Quick locking tailstock •Standard 1-1/2" x 8 TPI spindle mount •Reversing switch •Full length splash guard •2 Year Warranty •Standard Equipment:•4" 3-Jaw Chuck •7-1/2" 4-Jaw Chuck •7" Face Plate •Steady and Follow Rest •4-Way Toolpost •Set of Tools •MT-2 & MT-3 Centers

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 304.0000

$3,537.34

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

9" x 20" Bench Engine Lathe

Item #: JB559684504
Manufacturer: Palmgren
Mfg #: 9684504

Technical Specifications:
•Brand Name: Palmgren •Distance Between Centers: 21.65 •Model Number: 84504 •Motor: 1HP, 115V, 1PH •Mount: 3MT •Spindle Speed (RPM): 125-2000 •Spindle Taper: 3MT •Type: Bench Lathe •Weight: 276 lbs

Description:
•Palmgren's 9" bench engine lathe delivers the precision, power and versatility to handle a wide range of turning operations normally found in much larger machines •Heavy cast iron construction, smooth power transmission, precision thrust and ball bearings in the head stock and spindle, hardened and ground ways all designed to give you years of trouble-free, precise turning •Built and inspected to the DIN 8606 toolmakers' precision lathe standard, assuring accuracy and consistent performance •The bench lathe is the right choice for turning small metal parts and is used in prototype shops, tool rooms, fabrication shops, maintenance shops, jewelry manufacturing and by home and hobby machinists •Dual P5 tapper roller bearings on spindle •Prismatic bed of solid aged cast iron - hardened to HRO 45 - 52 for long life •3 Year Warranty

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 276.0000

$3,597.50

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

16" x 60" Lathe Engine DRO 230V, 3PH

Item #: JB559684524
Manufacturer: Palmgren
Mfg #: 9684524

Technical Specifications:
•Brand Name: Palmgren •Cross slide travel: 9 •Distance Between Centers: 60 •Model Number: D420X1500 •Motor: 6HP, 230V, 3PH •Mount: 6MT •Spindle Speed (RPM): 45-1800 •Spindle Taper: 6MT •Swing: 16 •Type: Bench Lathe •Weight: 3443 lbs

Description:
•Machine comes standard with a DRO and glass scales •All the gears are helical precision cut, hardened and ground running in a continual bath of oil •The main spindle is made of high alloy steel and mounted in precision taper roller bearings •The wide bed ways are made of stabilized cast iron, ground and hardened •The universal gear box delivers a broad range of feed and thread selections and each machine can do both inch and metric threads •Built and inspected to the DIN 8606 toolmakers precision lathe standard •3 Year Warranty

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 3443.0000

$31,944.14

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

11" x 27" Bench Combination Engine Lathe & Vari Speed Mill

Item #: JB559684520
Manufacturer: Palmgren
Mfg #: 9684520

Technical Specifications:
•Brand Name: Palmgren •Distance Between Centers: 27.56 •Model Number: 84520 •Mount: 4MT •Spindle Speed (RPM): 150-2000 •Spindle Taper: 4MT •Type: Bench Lathe/Mill

Description:
•Palmgren's combination 11" bench engine lathe and gear head mill delivers the precision, power and versatility to handle a wide range of turning, milling and drilling operations normally found in much larger machines •Heavy cast iron construction, smooth power transmission with precision thrust and ball bearings in the head stock and spindles, hardened and ground ways all designed to go give you years of trouble-free, precise turning, milling and hole making machining •Built and inspected to the DIN 8606 toolmakers precision lathe standard assuring accuracy and consistent performance •The all gear drive transmission on the mill delivers full power at any speed driving the cutting tools at nearly 100% of available horsepower and torque •With such a wide range of versatility and features, this all-purpose combination lathe/mill is one of the most function manual machine centers that can operate in all types and sizes of shops •3 Year Warranty

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 440.0000

$5,353.43

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

BDB-1340A With ACU-RITE 200S DRO

Item #: PY60321121
Manufacturer: Jet
Mfg #: 321121

Technical Specifications:
•Brand Name: Jet •Carriage Travel (in.): 35 •Compound Slide Travel (in.): 2-11/16 •Cross slide travel: 6-5/16 •Description: BDB-1340A Lathe with ACU-RITE 200T DRO Installed •Distance Between Centers: 40 •Follow Rest Capacity (in.): 2-3/4 •Inch Pitch Threads: (38) 3-1/2-80 TPI •Included Readout: ACU-RITE 200S •Length of Gap (in.): 8 •Max. Tool Size (in.): 5/8 x 5/8 •Metric Pitch Threads: (23) .45-10 •Model Number: BDB-1340A •Motor: 2HP, 230V, 1PH •Mount: D1-4 •Overall Dimensions: 71 x 32 x 45 •Range of Cross Feeds (IPR): .0006 - .013 •Range of Longitudinal Feeds (IPR): .0018 - .0374 •Spindle Bore (in.): 1-3/8 •Spindle Hole Diameter: 1-3/8 •Spindle Speed (RPM): 60-1240 •Spindle Speeds: (12) 60-1240 RPM •Spindle Taper: 5MT (3MT) •Spindle Type: D1-4 •Steady Rest Capacity (in.): 2-5/8 •Style: SV_1375591258793 •Swing: 13 •Swing over crosslide: 7-25/32 •Swing over gap: 18-3/4 •Tailstock Spindle Travel (in.): 3-3/4 •Tailstock Taper: 3MT •Weight: 1175 lbs •Width of Bed (in.): 7-3/8

Description:
•JET Belt Drive Bench Lathes feature an enclosed gearbox with helical cut gears for noise reduction and smooth operation •The full length splash guard on all sizes prevents hot chips and fluid from contaminating the work area and the quick change gearbox allows for fast and easy gear changes for metric threading •One of the most popular JET lathes now comes with an enclosed gearbox as a standard feature •Enclosed gearbox design provides smooth, quiet operation •Fast, easy speed changes •Low voltage motor controls •Helical cut headstock gears reudce noise •Change gears allow metric threading •Spindle is supported by precision tapered roller bearings •V-way bed is induction hardened and ground •Gap bed section provided for large diameter work •Independent leadscrew and feed rod •2 Year Warranty

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 1195.0000

$12,133.41

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

14" x 40" D360 Lathe Engine DRO 230V, 3PH

Item #: JB559684523
Manufacturer: Palmgren
Mfg #: 9684523

Technical Specifications:
•Brand Name: Palmgren •Cross slide travel: 7 •Distance Between Centers: 40 •Model Number: D360X1000 •Motor: 2HP, 230V, 3PH •Mount: 5MT •Spindle Speed (RPM): 45-1800 •Spindle Taper: 5MT •Swing: 14 •Type: Bench Lathe •Weight: 1892 lbs

Description:
•Machine comes standard with a DRO and glass scales •All the gears are helical precision cut, hardened and ground running in a continual bath of oil •The main spindle is made of high alloy steel and mounted in precision taper roller bearings •The wide bed ways are made of stabilized cast iron, ground and hardened •The universal gear box delivers a broad range of feed and thread selections and each machine can do both inch and metric threads •Built and inspected to the DIN 8606 toolmakers precision lathe standard •3 Year Warranty

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 1892.0000

$15,768.54

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

12" x 36" Engine Lathe 115V, 1PH

Item #: JB559684510
Manufacturer: Palmgren
Mfg #: 9684510

Technical Specifications:
•Brand Name: Palmgren •Cross slide travel: 6-3/8 •Distance Between Centers: 36 •Model Number: D320X920 •Motor: 2HP, 115/230V, 1PH •Mount: 5MT •Spindle Speed (RPM): 65-1800 •Spindle Taper: 5MT •Swing: 12 •Type: Bench Lathe •Weight: 1298 lbs

Description:
•Palmgren's 12" bench model engine lathe delivers the precision, power and versatility to handle a wide range of turning operations normally found in much larger machines •Heavy cast construction, smooth power transmission with helical gears, hardened and ground ways all designed to give you years of trouble-free, precise turning •All Palmgren lathes are built and inspected to the DIN 8606 toolmakers precision lathe standard assuring accuracy and consistent performance •The bench lathe is the right choice for turning small metal parts and is used in proto type shops, home machinists, jewelry manufacturing, tool rooms, fabrication shops and maintenance shops •EACH LATHE COMES STANDARD WITH: 3 jaw lathe chuck, Safety chuck and tool post guards, 4 way tool post, Centers, Chip tray, Precision thrust and ball bearings in the head stock •3 Year Warranty

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 1298.0000

$12,447.48

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

6" x 9" Bench Lathe 115V, 1PH

Item #: JB559684495
Manufacturer: Palmgren
Mfg #: 9684495

Technical Specifications:
•Brand Name: Palmgren •Cross slide travel: 2-1/4 •Distance Between Centers: 9-3/4 •Model Number: TU1503V •Motor: 5/8HP, 115V, 1PH •Mount: 1MT •Spindle Speed (RPM): 160-4000 •Spindle Taper: 1MT •Swing: 5-1/2 •Type: Bench Lathe •Weight: 150 lbs

Description:
•Palmgren's 6" bench model variable speed lathe delivers precision and versatility to handle the full range of turning operations •Heavy cast construction, smooth power transmission with all hardened steel gears,hardened and ground ways all desgined to give you years of trouble-free, precise turning •The bench lathe is the right choice for turning small metal parts and is used in prototype shops, home machinists, and jewelry manufacturing •Lathe comes standard with 3 jaw lathe chuck, center, chip trap •Variable speed with DC motor delivers full torque at all speeds •Change gear kit for threading •3 Year Warranty

Shipping Info:
•Actual Weight - 150.0000 •Addl Fee Over 70lb-$23.00 per item

$1,687.60

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

BDB-1340A With Taper Attachment

Item #: PY60321120
Manufacturer: Jet
Mfg #: 321120

Technical Specifications:
•Brand Name: Jet •Carriage Travel (in.): 35 •Compound Slide Travel (in.): 2-11/16 •Cross slide travel: 6-5-16 •Description: BDB-1340A-TAK Lathe with Taper Attachment Installed •Distance Between Centers: 40 •Follow Rest Capacity (in.): 2-3/4 •Inch Pitch Threads: (38) 3-1/2-80 TPI •Length of Gap (in.): 8 •Max. Tool Size (in.): 5/8 x 5/8 •Metric Pitch Threads: (23) .45-10 •Model Number: BDB-1340A •Motor: 2HP, 230V, 1PH •Mount: D1-4 •Overall Dimensions: 71 x 32 x 45 •Range of Cross Feeds (IPR): .0006 - .013 •Range of Longitudinal Feeds (IPR): .0018 - .0374 •Spindle Bore (in.): 1-3/8 •Spindle Hole Diameter: 1-3/8 •Spindle Speed (RPM): 60-1240 •Spindle Speeds: (12) 60-1240 RPM •Spindle Taper: 5MT (3MT) •Spindle Type: D1-4 •Steady Rest Capacity (in.): 2-5/8 •Style: SV_1375591258793 •Swing: 13 •Swing over crosslide: 7-25/32 •Swing over gap: 18-3/4 •Tailstock Spindle Travel (in.): 3-3/4 •Tailstock Taper: 3MT •Weight: 1175 lbs •Width of Bed (in.): 7-3/8

Description:
•JET Belt Drive Bench Lathes feature an enclosed gearbox with helical cut gears for noise reduction and smooth operation •The full length splash guard on all sizes prevents hot chips and fluid from contaminating the work area and the quick change gearbox allows for fast and easy gear changes for metric threading •One of the most popular JET lathes now comes with an enclosed gearbox as a standard feature •Enclosed gearbox design provides smooth, quiet operation •Fast, easy speed changes •Low voltage motor controls •Helical cut headstock gears reudce noise •Change gears allow metric threading •Spindle is supported by precision tapered roller bearings •V-way bed is induction hardened and ground •Gap bed section provided for large diameter work •Independent leadscrew and feed rod •2 Year Warranty

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 1195.0000

$12,571.88

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

9" x 20" Bench Combination Engine Lathe & Vari Speed Mill

Item #: JB559680213
Manufacturer: Palmgren
Mfg #: 9680213

Technical Specifications:
•Brand Name: Palmgren •Distance Between Centers: 20 •Model Number: M250 •Motor: 5/8HP, 115V, 1PH •Mount: 3MT •Spindle Speed (RPM): 125-2000 •Spindle Taper: 3MT •Type: Bench Lathe/Mill

Description:
•Palmgren's combination 9" bench engine lathe and gear head mill delivers the precision, power and versatility to handle a wide range of turning, milling and drilling operations normally found in much larger machines •Heavy cast iron construction, smooth power transmission with precision thrust and ball bearings in the head stock and spindles, hardened and ground ways all designed to go give you years of trouble-free, precise turning, milling and hole making machining •Built and inspected to the DIN 8606 toolmakers precision lathe standard assuring accuracy and consistent performance •The all gear drive transmission on the mill delivers full power at any speed driving the cutting tools at nearly 100% of available horsepower and torque •With such a wide range of versatility and features, this all-purpose combination lathe/mill is one of the most function manual machine centers that can operate in all types and sizes of shops •3 Year Warranty

Shipping Info:
•Addl Fee Under 70lb -$14.25 per item

$5,282.05

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

GHB-1340A With Newall DP700 DRO With Taper Attachment

Item #: PY60321115
Manufacturer: Jet
Mfg #: 321115

Technical Specifications:
•Brand Name: Jet •Carriage Travel (in.): 35 •Compound Slide Travel (in.): 2-11/16 •Cross slide travel: 6-5/16 •Distance Between Centers: 40 •Follow Rest Capacity (in.): 2-3/8 •Inch Pitch Threads: (38) 3-1/2-80 TPI •Included Readout: Newall DP700 •Length of Gap (in.): 8 •Max. Tool Size (in.): 5/8 x 5/8 •Metric Pitch Threads: (23) .45-10 •Model Number: GHB-1340A •Motor: 2HP, 230V, 1PH •Overall Dimensions: 79 x 28-1/2 x 30 •Range of Cross Feeds (IPR): .0006 - .0130 •Range of Longitudinal Feeds (IPR): .0018 - .0374 •Spindle Bore (in.): 1-3/8 •Spindle Speeds: (8) 70-2000 RPM •Spindle Type: D1-4 •Steady Rest Capacity (in.): 2-3/4 •Style: Bench - Geared Head •Swing: 13 •Swing over crosslide: 7-25/32 •Swing over gap: 18-3/4 •Tailstock Spindle Travel (in.): 3-3/4 •Tailstock Taper: 3MT •Weight: 1154 lbs •Width of Bed (in.): 7-3/8

Description:
•JET geared head bench lathes feature an enclosed gearbox for smooth, quiet operation •Precision roller bearings support the hardened and ground spindle resulting in tight tolerances •One of the most popular JET lathes now comes with an enclosed gear box •Enclosed gear box design provides smooth, quiet operation •Fast, easy speed changes •Hardened and ground gears are featured in the headstock and gearbox •D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings •Headstock is constantly oiled during operation •Gear box gives wide inch threading and feed capabilities with no gear changes •V-way bed design is induction hardened and ground •Gap bed section provided for larger diameter work •Independent leadscrew and feed rod •2 Year Warranty

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 1275.0000

$15,529.01

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

11" x 27" Bench Lathe and Gear Head Mil/Drill Combination Machine

Item #: PR711127
Manufacturer: PRM
Mfg #: :

Technical Specifications:
•Brand Name: PRM •Cross slide travel: 2.3 •Distance Between Centers: 27.559 •Model Number: 1127 •Motor: 1HP, 115V, 1PH •Mount: 4MT •Spindle Hole Diameter: 1.024 •Spindle Speed (RPM): 30-4000 •Spindle Taper: 4MT •Swing: 11.024 •Type: Bench Lathe/Mill Combo Unit •Weight: 678 lbs

Description:
Mill Specifications: 3/4 HP, 115V, 1PH motor •2MT spindle with draw bar •Spindle travel 1.969" •4-3/4" x 15-3/4" Table •Lathe Specifications: •Swing 11.024" •Center to center distance 27.6" •Spindle bore 1.024" •Motor: 1HP, 115V, 1PH •1 Year Warranty Parts •Weight 678 lbs. •Machine shown on optional floor stand - Order Number PR711127STAND •Not CSA approved Standard Accessories:•3 jaw chuck, dead center, change gears set, splash guard, 4 way tool post, chuck guard •F.O.B. WARREN, MI

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 562.0000 •Dimensions - Height: 39.0 Length: 54.0 Width: 30.0

$5,353.43

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Mini Lathe - #M1015 6'' Swing; 10'' Between Centers; 1/3HP; 1PH; 110V Motor

Item #: PY65M1015
Manufacturer: Shop Fox
Mfg #: M1015

Technical Specifications:
•Brand Name: Shop Fox •Cross slide travel: 2-3/8 •Distance Between Centers: 10 •Model Number: M1015 •Motor: 1/3HP, 110V, 1PH •Mount: 2MT •Spindle Hole Diameter: 3/8 •Spindle Speed (RPM): 100-2000 •Spindle Taper: 2MT •Swing: 6 •Type: Mini Lathe •Weight: 64 lbs

Description:
•Single-phase •Cross slide travel: 2-3/8" •Tailstock taper: MT 1 •STANDARD EQUIPMENT: 3" 3-jaw chuck with internal & external jaws 4 hex wrenches Double-ended wrench Socket head wrench MT 1 dead center Oil cup Chuck key Fuse 2 T-nuts Thread cutting kit •2 Year Warranty •F.O.B. Factory

Shipping Info:
•Commercial Truck - Call for Shipping Charges •Actual Weight - 64.0000

$1,376.60

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Bench Hobby Lathe - #BL1

Item #: RM30BL1
Manufacturer: Foredom
Mfg #: M.BL

Technical Specifications:
•Brand Name: Foredom •Distance Between Centers: 13 •Model Number: M.BL •Motor: 125 Watts, 1/6HP •Spindle Hole Diameter: 5/16 •Spindle Speed (RPM): 500-7000 •Type: Bench Hobby Lathe •Weight: 7.5 lbs

Description:
•1/6 Horsepower •BL1 Bench Lathe with Tapered Spindles Powerful variable speed bench lathe in a compact size suitable for use at the workbench. Its permanent magnet motor is extremely quiet and smooth running with all the power and speed required for a variety of polishing and buffing jobs. Cast iron base has suction cup feet for a secure hold on the work surface. Lathe comes with the TM-5 (left hand) and TM-6 (right hand) Tapered Spindles for holding buffs and brushes up to 4 (100mm) in diameter. Other lathe accessories are available separately. •1/6 HP High Torque Motor •125 Watts (continuous rating) •Ball Bearing •1,800-7,000 RPM •CSA Certified

Shipping Info:
•Actual Weight - 7.9000 •Dimensions - Height: 6.40 Length: 10.7 Width: 7.40

$265.00

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It