Email: sales@besttoolandsupply.com | Phone: (888) 988-8820
We ship from multiple warehouses throughout the USA
to get you what you need as fast as possible!
Millions of items in stock!
Fast online checkout - No account required
Cart 0
Cart 0

Industrial Machinery > Milling Machines (ET03) - (2008 Products)

Industrial Machinery > Milling Machines (ET03)
Rong Fu - 1 Phase, 20" Swing, Geared Head Mill Drill Machine - 28-3/4" Table Length x 8-1/4" Table Width, 18-1/8" Longitudinal Travel, 9" Cross Travel, 6 Spindle Speeds, 1 hp, 220 Volts - Best Tool & Supply

Rong Fu - 1 Phase, 20" Swing, Geared Head Mill Drill Machine - 28-3/4" Table Length x 8-1/4" Table Width, 18-1/8" Longitudinal Travel, 9" Cross Travel, 6 Spindle Speeds, 1 hp, 220 Volts


Item #: 09542911
Brand: Rong Fu
Model #: RF-40/1 M
Exact Tooling IR#: 04

Features and Benefits

Geared head drive systems are similar to step pulleys, but are driven by a geared transmission. They offer rapid speed changes by turning a hand dial. They feature three to four fixed speeds
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors. Machine phase would commonly match the type of electrical current used in the facility.
Product Specifications
Spindle Speed Control Geared Head
Swing Distance (Inch) 20
Phase 1
Table Length (Inch) 28-3/4
Table Width (Inch) 8-1/4
Longitudinal Travel (Inch) 18-1/8
Cross Travel (Inch) 9
Number of Spindle Speeds 6
Minimum Spindle Speed (RPM) 50.00
Maximum Spindle Speed (RPM) 1550.00
Spindle Travel Length (Decimal Inch) 5.1181
Spindle Taper Size 3MT/R8
Drilling Capacity in Steel (mm) 38.10
Drilling Capacity in Steel (Inch) 1-1/2
Drilling Capacity in Cast Iron (mm) 38.10
Drilling Capacity in Cast Iron (Inch) 1-1/2
Tapping Capacity in Steel (mm) 19.05
Tapping Capacity in Steel (Inch) 3/4
Quill Diameter (Decimal Inch) 4.5276
Spindle Power Feed Rate Per Minute (mm/rev) 0.12; 0.18; 0.25
Maximum Spindle To Column Distance (Decimal Inch) 10.2362
Number of T-Slots 4
T-Slot Size (mm) 16 x 26
Left-Hand Head Tilt (Degrees) 90.00
Right-Hand Head Tilt (Degrees) 90.00
Horsepower (HP) 1.00
Voltage 220

$5,292.27

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Rong Fu - 1 Phase, Step Pulley Mill Drill Machine - 28-3/4" Table Length x 8-1/4" Table Width, 18-1/8" Longitudinal Travel, 7-1/2" Cross Travel, 12 Spindle Speeds, 1.5 hp, 110/220 Volts - Best Tool & Supply

Rong Fu - 1 Phase, Step Pulley Mill Drill Machine - 28-3/4" Table Length x 8-1/4" Table Width, 18-1/8" Longitudinal Travel, 7-1/2" Cross Travel, 12 Spindle Speeds, 1.5 hp, 110/220 Volts


Item #: 00685420
Brand: Rong Fu
Model #: RF-31/1
Exact Tooling IR#: 04

Features and Benefits

Step pulleys are driven by a belt system that is manually changed to achieve a specific speed. They commonly feature 8 or 16 fixed speeds.
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors. Machine phase would commonly match the type of electrical current used in the facility.
Product Specifications
Spindle Speed Control Step Pulley
Phase 1
Table Length (Inch) 28-3/4
Table Width (Inch) 8-1/4
Longitudinal Travel (Inch) 18-1/8
Cross Travel (Inch) 7-1/2
Number of Spindle Speeds 12
Minimum Spindle Speed (RPM) 125.00
Maximum Spindle Speed (RPM) 3000.00
Spindle Travel Length (mm) 127.00
Spindle Travel Length (Inch) 5
Spindle Taper Size R8
Drilling Capacity in Steel (mm) 31.75
Drilling Capacity in Steel (Inch) 1-1/4
Drilling Capacity in Cast Iron (mm) 31.75
Drilling Capacity in Cast Iron (Inch) 1-1/4
Tapping Capacity in Steel (mm) 15.88
Tapping Capacity in Steel (Inch) 5/8
Quill Diameter (Decimal Inch) 4.5276
Spindle Power Feed Rate Per Minute (mm/rev) 0.12; 0.18; 0.25
Maximum Spindle To Column Distance (Decimal Inch) 8.0709
Number of T-Slots 4
T-Slot Size (mm) 16 x 26
Head Swivel (Degrees) 360.00
Horsepower (HP) 1.50
Voltage 110/220

$4,776.73

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Jet - 1 Phase, 15-7/8" Swing, Step Pulley Mill Drill Combination - 31-3/4" Table Length x 9-1/2" Table Width, 20-1/2" Longitudinal Travel, 2 hp, 115/230 Volts - Best Tool & Supply

Jet - 1 Phase, 15-7/8" Swing, Step Pulley Mill Drill Combination - 31-3/4" Table Length x 9-1/2" Table Width, 20-1/2" Longitudinal Travel, 2 hp, 115/230 Volts


Item #: 35295245
Brand: Jet
Model #: 350133
Exact Tooling IR#: 04

Features and Benefits

Step pulleys are driven by a belt system that is manually changed to achieve a specific speed. They commonly feature 8 or 16 fixed speeds.
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors. Machine phase would commonly match the type of electrical current used in the facility.
Product Specifications
Spindle Speed Control Step Pulley
Swing Distance (Inch) 15-7/8
Phase 1
Table Length (Inch) 31-3/4
Table Width (Inch) 9-1/2
Longitudinal Travel (Inch) 20-1/2
Minimum Spindle Speed (RPM) 150.00
Maximum Spindle Speed (RPM) 3000.00
Machine Type Mill Drill Combination
Power Down Feed No
Spindle Taper Size R8
Voltage Tolerance 115/230
Quill Diameter (Inch) 3
Maximum Spindle to Table Distance (Inch) 18
Number of T-Slots 4
T-Slot Size (Inch) 5/8
Horsepower (HP) 2
Voltage 115/230
Overall Length (Decimal Inch) 47.0000
Overall Height (Inch) 40
Overall Depth (Inch) 51
Includes Mill Drill; Newall DP500 DRO

$5,404.41

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Jet - 1 Phase, 15-7/8" Swing, Step Pulley Mill Drill Combination - 31-3/4" Table Length x 9-1/2" Table Width, 20-1/2" Longitudinal Travel, 2 hp, 230 Volts - Best Tool & Supply

Jet - 1 Phase, 15-7/8" Swing, Step Pulley Mill Drill Combination - 31-3/4" Table Length x 9-1/2" Table Width, 20-1/2" Longitudinal Travel, 2 hp, 230 Volts


Item #: 35295211
Brand: Jet
Model #: 350136
Exact Tooling IR#: 04

Features and Benefits

Step pulleys are driven by a belt system that is manually changed to achieve a specific speed. They commonly feature 8 or 16 fixed speeds.
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors. Machine phase would commonly match the type of electrical current used in the facility.
Product Specifications
Spindle Speed Control Step Pulley
Swing Distance (Inch) 15-7/8
Phase 1
Table Length (Inch) 31-3/4
Table Width (Inch) 9-1/2
Longitudinal Travel (Inch) 20-1/2
Minimum Spindle Speed (RPM) 150.00
Maximum Spindle Speed (RPM) 3000.00
Machine Type Mill Drill Combination
Power Down Feed Yes
Spindle Taper Size R8
Voltage Tolerance 230
Quill Diameter (Inch) 3
Maximum Spindle to Table Distance (Inch) 26
Number of T-Slots 4
T-Slot Size (Inch) 5/8
Horsepower (HP) 2
Voltage 230
Overall Length (Decimal Inch) 47.0000
Overall Height (Inch) 40
Overall Depth (Inch) 51
Includes Mill Drill; Newall DP500 DRO; X-Axis Powerfeed

$7,384.41

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Jet - 1 Phase, 19-11/16" Swing, Geared Head Mill Drill Combination - 32-1/4" Table Length x 9-1/2" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, 6 Spindle Speeds, 1.5 hp, 115/230 Volts - Best Tool & Supply

Jet - 1 Phase, 19-11/16" Swing, Geared Head Mill Drill Combination - 32-1/4" Table Length x 9-1/2" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, 6 Spindle Speeds, 1.5 hp, 115/230 Volts


Item #: 39937222
Brand: Jet
Model #: 351153
Exact Tooling IR#: 04

Features and Benefits

Geared head drive systems are similar to step pulleys, but are driven by a geared transmission. They offer rapid speed changes by turning a hand dial. They feature three to four fixed speeds
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors. Machine phase would commonly match the type of electrical current used in the facility.
Product Specifications
Spindle Speed Control Geared Head
Swing Distance (Inch) 19-11/16
Phase 1
Table Length (Inch) 32-1/4
Table Width (Inch) 9-1/2
Longitudinal Travel (Inch) 20-1/2
Cross Travel (Inch) 8-1/4
Number of Spindle Speeds 6
Minimum Spindle Speed (RPM) 65.00
Maximum Spindle Speed (RPM) 1550.00
Spindle Travel Length (mm) 130.00
Spindle Travel Length (Inch) 5
Spindle Travel Length (Decimal Inch) 5.0000
Machine Type Mill Drill Combination
Power Down Feed Yes
Spindle Taper Size R8
Drilling Capacity in Steel (Inch) 1-1/4
Voltage Tolerance 115/230
Drilling Capacity in Cast Iron (Inch) 1-1/2
Quill Diameter (Inch) 3
Maximum Spindle to Table Distance (Inch) 18-1/8
Number of T-Slots 4
T-Slot Size (Inch) 5/8
Head Swivel (Degrees) 90.00
Horsepower (HP) 1.50
Voltage 115/230
Overall Length (Inch) 29
Overall Height (Inch) 50
Overall Depth (Inch) 36
Includes Spindle Guard; Work Lamp; Power Down Feed; Newall DP700 2-Axis DRO; X-Axis Powerfeed

$11,245.41

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Jet - 1 Phase, 15-7/8" Swing, Step Pulley Mill Drill Combination - 31-3/4" Table Length x 9-1/2" Table Width, 20-1/2" Longitudinal Travel, 2 hp, 230 Volts - Best Tool & Supply

Jet - 1 Phase, 15-7/8" Swing, Step Pulley Mill Drill Combination - 31-3/4" Table Length x 9-1/2" Table Width, 20-1/2" Longitudinal Travel, 2 hp, 230 Volts


Item #: 35295203
Brand: Jet
Model #: 350135
Exact Tooling IR#: 04

Features and Benefits

Step pulleys are driven by a belt system that is manually changed to achieve a specific speed. They commonly feature 8 or 16 fixed speeds.
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors. Machine phase would commonly match the type of electrical current used in the facility.
Product Specifications
Spindle Speed Control Step Pulley
Swing Distance (Inch) 15-7/8
Phase 1
Table Length (Inch) 31-3/4
Table Width (Inch) 9-1/2
Longitudinal Travel (Inch) 20-1/2
Minimum Spindle Speed (RPM) 150.00
Maximum Spindle Speed (RPM) 3000.00
Machine Type Mill Drill Combination
Power Down Feed No
Spindle Taper Size R8
Voltage Tolerance 230
Quill Diameter (Inch) 3
Maximum Spindle to Table Distance (Inch) 26
Number of T-Slots 4
T-Slot Size (Inch) 5/8
Horsepower (HP) 2
Voltage 230
Overall Length (Decimal Inch) 47.0000
Overall Height (Inch) 40
Overall Depth (Inch) 51
Includes Mill Drill; Newall DP500 DRO

$6,285.51

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Rong Fu - 3 Phase, 20" Swing, Geared Head Mill Drill Machine - 32" Table Length x 9-3/8" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, 6 Spindle Speeds, 1 hp, 220 Volts - Best Tool & Supply

Rong Fu - 3 Phase, 20" Swing, Geared Head Mill Drill Machine - 32" Table Length x 9-3/8" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, 6 Spindle Speeds, 1 hp, 220 Volts


Item #: 64162779
Brand: Rong Fu
Model #: RF-45/3
Exact Tooling IR#: 04

Features and Benefits

Geared head drive systems are similar to step pulleys, but are driven by a geared transmission. They offer rapid speed changes by turning a hand dial. They feature three to four fixed speeds
Three-phase refers to three individual lines (coils) that connect to and run voltage through the motor. Each line alternates in a sequence as they reach their voltage peak. Three-phase lines provide a more stable flow of voltage and more horsepower to the equipment.
Product Specifications
Spindle Speed Control Geared Head
Swing Distance (Inch) 20
Phase 3
Table Length (Inch) 32
Table Width (Inch) 9-3/8
Longitudinal Travel (Inch) 20-1/2
Cross Travel (Inch) 8-1/4
Number of Spindle Speeds 6
Minimum Spindle Speed (RPM) 65.00
Maximum Spindle Speed (RPM) 1550.00
Spindle Travel Length (Decimal Inch) 5.1181
Spindle Taper Size 3MT/R8
Drilling Capacity in Steel (mm) 38.10
Drilling Capacity in Steel (Inch) 1-1/2
Drilling Capacity in Cast Iron (mm) 38.10
Drilling Capacity in Cast Iron (Inch) 1-1/2
Tapping Capacity in Steel (mm) 19.05
Tapping Capacity in Steel (Inch) 3/4
Spindle Power Feed Rate Per Minute (mm/rev) 0.12; 0.18; 0.25
Maximum Spindle To Column Distance (Decimal Inch) 10.0394
Number of T-Slots 4
T-Slot Size (mm) 16 x 26
Left-Hand Head Tilt (Degrees) 90.00
Right-Hand Head Tilt (Degrees) 30.00
Horsepower (HP) 1.00
Voltage 220

$6,018.05

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Rong Fu - 1 Phase, 20" Swing, Geared Head Mill Drill Machine - 32" Table Length x 9-3/8" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, 6 Spindle Speeds, 1 hp, 220 Volts - Best Tool & Supply

Rong Fu - 1 Phase, 20" Swing, Geared Head Mill Drill Machine - 32" Table Length x 9-3/8" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, 6 Spindle Speeds, 1 hp, 220 Volts


Item #: 60859287
Brand: Rong Fu
Model #: RF-45N2F
Exact Tooling IR#: 04

Features and Benefits

Geared head drive systems are similar to step pulleys, but are driven by a geared transmission. They offer rapid speed changes by turning a hand dial. They feature three to four fixed speeds
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors. Machine phase would commonly match the type of electrical current used in the facility.
Product Specifications
Spindle Speed Control Geared Head
Swing Distance (Inch) 20
Phase 1
Table Length (Inch) 32
Table Width (Inch) 9-3/8
Longitudinal Travel (Inch) 20-1/2
Cross Travel (Inch) 8-1/4
Number of Spindle Speeds 6
Minimum Spindle Speed (RPM) 65.00
Maximum Spindle Speed (RPM) 1550.00
Spindle Travel Length (Decimal Inch) 5.1181
Spindle Taper Size 3MT/R8
Drilling Capacity in Steel (mm) 38.10
Drilling Capacity in Steel (Inch) 1-1/2
Drilling Capacity in Cast Iron (mm) 38.10
Drilling Capacity in Cast Iron (Inch) 1-1/2
Tapping Capacity in Steel (mm) 19.05
Tapping Capacity in Steel (Inch) 3/4
Spindle Power Feed Rate Per Minute (mm/rev) 0.12; 0.18; 0.25
Maximum Spindle To Column Distance (Decimal Inch) 10.0394
Number of T-Slots 4
T-Slot Size (mm) 16 x 26
Left-Hand Head Tilt (Degrees) 90.00
Right-Hand Head Tilt (Degrees) 30.00
Horsepower (HP) 1.00
Voltage 220

$7,112.63

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Jet - 1 Phase, 19-11/16" Swing, Geared Head Mill Drill Combination - 32-1/4" Table Length x 9-1/2" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, 6 Spindle Speeds, 1.5 hp, 115/230 Volts - Best Tool & Supply

Jet - 1 Phase, 19-11/16" Swing, Geared Head Mill Drill Combination - 32-1/4" Table Length x 9-1/2" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, 6 Spindle Speeds, 1.5 hp, 115/230 Volts


Item #: 54657788
Brand: Jet
Model #: 351161
Exact Tooling IR#: 04

Features and Benefits

Geared head drive systems are similar to step pulleys, but are driven by a geared transmission. They offer rapid speed changes by turning a hand dial. They feature three to four fixed speeds
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors. Machine phase would commonly match the type of electrical current used in the facility.
Product Specifications
Spindle Speed Control Geared Head
Swing Distance (Inch) 19-11/16
Phase 1
Table Length (Inch) 32-1/4
Table Width (Inch) 9-1/2
Longitudinal Travel (Inch) 20-1/2
Cross Travel (Inch) 8-1/4
Number of Spindle Speeds 6
Minimum Spindle Speed (RPM) 65.00
Maximum Spindle Speed (RPM) 1550.00
Spindle Travel Length (mm) 130.00
Spindle Travel Length (Inch) 5
Spindle Travel Length (Decimal Inch) 5.0000
Machine Type Mill Drill Combination
Power Down Feed Yes
Spindle Taper Size R8
Drilling Capacity in Steel (Inch) 1-1/4
Voltage Tolerance 115/230
Drilling Capacity in Cast Iron (Inch) 1-1/2
Quill Diameter (Inch) 3
Maximum Spindle to Table Distance (Inch) 18-1/8
Number of T-Slots 4
T-Slot Size (Inch) 5/8
Head Swivel (Degrees) 90.00
Horsepower (HP) 1.50
Voltage 115/230
Overall Length (Inch) 29
Overall Height (Inch) 50
Overall Depth (Inch) 36
Includes Spindle Guard; Work Lamp; Power Down Feed; Newall DP500 DRO; X-Axis Powerfeed

$10,700.91

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Enco - 1 Phase, 20" Swing, Geared Head Mill Drill Combination - 37-1/2" Table Length x 28" Table Width, 22" Longitudinal Travel, 8" Cross Travel, 6 Spindle Speeds, 2 hp, 220 Volts - Best Tool & Supply

Enco - 1 Phase, 20" Swing, Geared Head Mill Drill Combination - 37-1/2" Table Length x 28" Table Width, 22" Longitudinal Travel, 8" Cross Travel, 6 Spindle Speeds, 2 hp, 220 Volts


Item #: 42507863
Brand: Enco
Exact Tooling IR#: 04

Features and Benefits

Geared head drive systems are similar to step pulleys, but are driven by a geared transmission. They offer rapid speed changes by turning a hand dial. They feature three to four fixed speeds
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors. Machine phase would commonly match the type of electrical current used in the facility.
Product Specifications
Spindle Speed Control Geared Head
Swing Distance (Inch) 20
Phase 1
Table Length (Inch) 37-1/2
Table Width (Inch) 28
Longitudinal Travel (Inch) 22
Cross Travel (Inch) 8
Number of Spindle Speeds 6
Spindle Travel Length (Inch) 38
Machine Type Mill Drill Combination
Power Down Feed No
Spindle Diameter (Inch) 3
Spindle Taper Size R8
T-Slot Size (Inch) 1/2
Voltage Tolerance +/- 10%
Quill Diameter (Inch) 3
Number of T-Slots 4
T-Slot Size (Inch) 1/2
Head Swivel (Degrees) 90.00
Horsepower (HP) 2.00
Voltage 220
Overall Height (Inch) 57
Includes AL-500D Power Feed (MSC 41046715); Newall DP500 (MSC 42440156); Stand (MSC 09519919); Vise (MSC 09193053)
Special Item Information Motor Made in USA

$5,937.52

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Jet - 1 Phase, 20-1/2" Swing, Geared Head Mill Drill Combination - 32-1/4" Table Length x 9-1/2" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, 6 Spindle Speeds, 1.5 hp, 115/230 Volts - Best Tool & Supply

Jet - 1 Phase, 20-1/2" Swing, Geared Head Mill Drill Combination - 32-1/4" Table Length x 9-1/2" Table Width, 20-1/2" Longitudinal Travel, 8-1/4" Cross Travel, 6 Spindle Speeds, 1.5 hp, 115/230 Volts


Item #: 39707856
Brand: Jet
Model #: 351040
Exact Tooling IR#: 04

Features and Benefits

Geared head drive systems are similar to step pulleys, but are driven by a geared transmission. They offer rapid speed changes by turning a hand dial. They feature three to four fixed speeds
Single-phase refers to one phase line (coil) that connects to and runs voltage through the motor. Single phase lines are not as efficient as three-phase motors. Machine phase would commonly match the type of electrical current used in the facility.
Product Specifications
Spindle Speed Control Geared Head
Swing Distance (Inch) 20-1/2
Phase 1
Table Length (Inch) 32-1/4
Table Width (Inch) 9-1/2
Longitudinal Travel (Inch) 20-1/2
Cross Travel (Inch) 8-1/4
Number of Spindle Speeds 6
Minimum Spindle Speed (RPM) 65.00
Maximum Spindle Speed (RPM) 1550.00
Spindle Travel Length (mm) 130.00
Spindle Travel Length (Inch) 5
Spindle Travel Length (Decimal Inch) 5.0000
Machine Type Mill Drill Combination
Power Down Feed No
Spindle Taper Size R8
Drilling Capacity in Steel (Inch) 1-1/4
Voltage Tolerance 115/230
Drilling Capacity in Cast Iron (Inch) 1-1/2
Quill Diameter (Inch) 3
Maximum Spindle to Table Distance (Inch) 15-3/4
Number of T-Slots 4
T-Slot Size (Inch) 5/8
Head Swivel (Degrees) 90.00
Horsepower (HP) 1.50
Voltage 115/230
Overall Length (Inch) 28
Overall Height (Inch) 42-1/2
Overall Depth (Inch) 39-1/4
Includes Spindle Guard; Work Lamp

$5,165.28

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Jet - 9" Table Width x 49" Table Length, Electronic Variable Speed Control, 3 Phase Knee Milling Machine - R8 Spindle Taper, 3 hp - Best Tool & Supply

Jet - 9" Table Width x 49" Table Length, Electronic Variable Speed Control, 3 Phase Knee Milling Machine - R8 Spindle Taper, 3 hp


Item #: 30168330
Brand: Jet
Model #: 894310
Exact Tooling IR#: 04

Features and Benefits

Electronic Variable Speed control (EVS, are similar to variable speed pulleys, but the speed is controlled electronically rather than manually by turning a dial. They feature several speeds within a specified speed range.
Three-phase refers to three individual lines (coils) that connect to and run voltage through the motor. Each line alternates in a sequence as they reach their voltage peak. They provide a more stable flow of voltage and more horsepower to the equipment.
Product Specifications
Spindle Speed Control Electronic Variable Speed
Table Length (Inch) 49
Table Width (Inch) 9
Phase 3
Longitudinal Travel (Decimal Inch) 36.0000
Cross Travel (Decimal Inch) 16.0000
Knee Travel (Decimal Inch) 14.0000
Number of Spindle Speeds Variable
Maximum Spindle Speed (RPM) 5000.00
Minimum Spindle Speed (RPM) 60.00
Includes EVS-949 Mill with 2-Axis ACU-RITE 200S DRO and X-Axis JET Powerfeed
Spindle Travel Length (Decimal Inch) 5.0000
Spindle Taper Size R8
Quill Diameter (Decimal Inch) 3.3750
Minimum Spindle to Table Distance (Decimal Inch) 18.7500
Maximum Spindle to Table Distance (Decimal Inch) 18.7500
Minimum Spindle to Column Distance (Decimal Inch) 21.4000
Maximum Spindle To Column Distance (Decimal Inch) 21.4000
Table Load Capacity (Lb.) 550.00
Number of T-Slots 3
Left-Hand Head Tilt (Degrees) 45.00
Right-Hand Head Tilt (Degrees) 90.00
Ram Travel Length (Inch) 14
Horsepower (HP) 3.00
Voltage 230
Overall Length (Decimal Inch) 68.0000
Overall Height (Inch) 84
Overall Depth (Inch) 63
Certification CSA/UL
Warranty Mfr's 3 Year Warranty

$28,530.81

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Jet - 10" Table Width x 50" Table Length, Variable Speed Pulley Control, 3 Phase Knee Milling Machine - R8 Spindle Taper, 3 hp - Best Tool & Supply

Jet - 10" Table Width x 50" Table Length, Variable Speed Pulley Control, 3 Phase Knee Milling Machine - R8 Spindle Taper, 3 hp


Item #: 69631836
Brand: Jet
Model #: 690235
Exact Tooling IR#: 04

Features and Benefits

Variable speed pulleys are driven by a V-shaped belt system and a variable speed assembly that regulates an infinite speed range change by the turn of a dial.
Three-phase refers to three individual lines (coils) that connect to and run voltage through the motor. Each line alternates in a sequence as they reach their voltage peak. They provide a more stable flow of voltage and more horsepower to the equipment.
Product Specifications
Spindle Speed Control Variable Speed Pulley
Table Length (Inch) 50
Table Width (Inch) 10
Phase 3
Longitudinal Travel (Decimal Inch) 35.0000
Cross Travel (Decimal Inch) 15.2500
Knee Travel (Decimal Inch) 14.2500
Number of Spindle Speeds Variable
Maximum Spindle Speed (RPM) 3800.00
Minimum Spindle Speed (RPM) 70.00
Includes X-Axis Powerfeed; Acu-Rite VUE DRO
Spindle Travel Length (Inch) 5
Spindle Taper Size R8
Quill Diameter (Inch) 3-3/8
Minimum Spindle to Table Distance (Decimal Inch) 19.0000
Maximum Spindle to Table Distance (Inch) 19
Maximum Spindle To Column Distance (Inch) 26
Table Load Capacity (kg) 720.00
Number of T-Slots 3
Left-Hand Head Tilt (Degrees) 90.00
Right-Hand Head Tilt (Degrees) 90.00
Forward Head Tilt (Degrees) 45.00
Backward Head Tilt (Degrees) 45.00
Ram Travel Length (Inch) 20-1/2
Horsepower (HP) 3.00
Voltage 230/460
Overall Length (Inch) 96
Overall Height (Inch) 78
Overall Depth (Inch) 88

$22,769.01

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Jet - 9" Table Width x 49" Table Length, Variable Speed Pulley Control, 3 Phase Knee Milling Machine - R8 Spindle Taper, 3 hp - Best Tool & Supply

Jet - 9" Table Width x 49" Table Length, Variable Speed Pulley Control, 3 Phase Knee Milling Machine - R8 Spindle Taper, 3 hp


Item #: 30168892
Brand: Jet
Model #: 894213
Exact Tooling IR#: 04

Features and Benefits

Variable speed pulleys are driven by a V-shaped belt system and a variable speed assembly that regulates an infinite speed range change by the turn of a dial.
Three-phase refers to three individual lines (coils) that connect to and run voltage through the motor. Each line alternates in a sequence as they reach their voltage peak. They provide a more stable flow of voltage and more horsepower to the equipment.
Product Specifications
Spindle Speed Control Variable Speed Pulley
Table Length (Inch) 49
Table Width (Inch) 9
Phase 3
Longitudinal Travel (Decimal Inch) 36.0000
Cross Travel (Decimal Inch) 16.0000
Knee Travel (Decimal Inch) 14.0000
Number of Spindle Speeds Variable
Maximum Spindle Speed (RPM) 4500.00
Minimum Spindle Speed (RPM) 60.00
Includes ETM-949 Mill with 3-Axis ACU-RITE 300S (Knee) DRO and Servo X, Y-Axis Powerfeeds
Spindle Travel Length (Decimal Inch) 5.0000
Spindle Taper Size R8
Quill Diameter (Decimal Inch) 3.3750
Minimum Spindle to Table Distance (Decimal Inch) 18.7500
Maximum Spindle to Table Distance (Decimal Inch) 18.7500
Minimum Spindle to Column Distance (Decimal Inch) 21.4000
Maximum Spindle To Column Distance (Decimal Inch) 21.4000
Table Load Capacity (Lb.) 550.00
Number of T-Slots 3
Left-Hand Head Tilt (Degrees) 45.00
Right-Hand Head Tilt (Degrees) 90.00
Ram Travel Length (Inch) 14
Horsepower (HP) 3.00
Voltage 230
Overall Length (Decimal Inch) 68.0000
Overall Height (Inch) 84
Overall Depth (Inch) 63
Certification CSA/UL
Warranty Mfr's 3 Year Warranty

$30,689.01

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Jet - 9" Table Width x 49" Table Length, Variable Speed Pulley Control, 3 Phase Knee Milling Machine - R8 Spindle Taper, 3 hp - Best Tool & Supply

Jet - 9" Table Width x 49" Table Length, Variable Speed Pulley Control, 3 Phase Knee Milling Machine - R8 Spindle Taper, 3 hp


Item #: 30168603
Brand: Jet
Model #: 894167
Exact Tooling IR#: 04

Features and Benefits

Variable speed pulleys are driven by a V-shaped belt system and a variable speed assembly that regulates an infinite speed range change by the turn of a dial.
Three-phase refers to three individual lines (coils) that connect to and run voltage through the motor. Each line alternates in a sequence as they reach their voltage peak. They provide a more stable flow of voltage and more horsepower to the equipment.
Product Specifications
Spindle Speed Control Variable Speed Pulley
Table Length (Inch) 49
Table Width (Inch) 9
Phase 3
Longitudinal Travel (Decimal Inch) 36.0000
Cross Travel (Decimal Inch) 16.0000
Knee Travel (Decimal Inch) 14.0000
Number of Spindle Speeds Variable
Maximum Spindle Speed (RPM) 5000.00
Minimum Spindle Speed (RPM) 60.00
Includes ETM-949 Mill with 3-Axis Newall DP700 (Knee) DRO and X-Axis JET Powerfeed and KURT Powered Draw Bar
Spindle Travel Length (Decimal Inch) 5.0000
Spindle Taper Size R8
Quill Diameter (Decimal Inch) 3.3750
Minimum Spindle to Table Distance (Decimal Inch) 18.7500
Maximum Spindle to Table Distance (Decimal Inch) 18.7500
Minimum Spindle to Column Distance (Decimal Inch) 21.4000
Maximum Spindle To Column Distance (Decimal Inch) 21.4000
Table Load Capacity (Lb.) 550.00
Number of T-Slots 3
Left-Hand Head Tilt (Degrees) 45.00
Right-Hand Head Tilt (Degrees) 90.00
Ram Travel Length (Inch) 14
Horsepower (HP) 3.00
Voltage 230
Overall Length (Decimal Inch) 68.0000
Overall Height (Inch) 84
Overall Depth (Inch) 63
Certification CSA/UL
Warranty Mfr's 3 Year Warranty

$29,283.21

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Jet - 54" Table Width x 12" Table Length, Variable Speed Pulley Control, 3 Phase Knee Milling Machine - R8 Spindle Taper, 5 hp - Best Tool & Supply

Jet - 54" Table Width x 12" Table Length, Variable Speed Pulley Control, 3 Phase Knee Milling Machine - R8 Spindle Taper, 5 hp


Item #: 46044152
Brand: Jet
Model #: 698133
Exact Tooling IR#: 04

Features and Benefits

Variable speed pulleys are driven by a V-shaped belt system and a variable speed assembly that regulates an infinite speed range change by the turn of a dial.
Three-phase refers to three individual lines (coils) that connect to and run voltage through the motor. Each line alternates in a sequence as they reach their voltage peak. They provide a more stable flow of voltage and more horsepower to the equipment.
Product Specifications
Spindle Speed Control Variable Speed Pulley
Table Length (Inch) 12
Table Width (Inch) 54
Phase 3
Longitudinal Travel (Decimal Inch) 33.8750
Cross Travel (Decimal Inch) 15.3333
Knee Travel (Decimal Inch) 19.2500
Maximum Spindle Speed (RPM) 3800.00
Minimum Spindle Speed (RPM) 80.00
Includes 3-Axis Newall DP700 (Knee) DRO System; X-Axis Powerfeed; Air Powered Draw Bar
Spindle Travel Length (Inch) 5
Spindle Taper Size R8
Quill Diameter (Inch) 4-1/8
Maximum Spindle to Table Distance (Inch) 23
Maximum Spindle To Column Distance (Inch) 27-3/4
Table Load Capacity (Lb.) 925.00
Number of T-Slots 3
Left-Hand Head Tilt (Degrees) 45.00
Right-Hand Head Tilt (Degrees) 90.00
Ram Travel Length (Inch) 25
Horsepower (HP) 5.00
Voltage 230/460

$28,850.74

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Jet - 9" Table Width x 42" Table Length, Step Pulley Control, 3 Phase Knee Milling Machine - R8 Spindle Taper, 2 hp - Best Tool & Supply

Jet - 9" Table Width x 42" Table Length, Step Pulley Control, 3 Phase Knee Milling Machine - R8 Spindle Taper, 2 hp


Item #: 56593908
Brand: Jet
Model #: 690168
Exact Tooling IR#: 04

Features and Benefits

Step pulleys are driven by a belt system that is manually changed to achieve a specific speed. They commonly feature 8 or 16 fixed speeds.
Three-phase refers to three individual lines (coils) that connect to and run voltage through the motor. Each line alternates in a sequence as they reach their voltage peak. They provide a more stable flow of voltage and more horsepower to the equipment.
Product Specifications
Spindle Speed Control Step Pulley
Table Length (Inch) 42
Table Width (Inch) 9
Phase 3
Longitudinal Travel (Decimal Inch) 23.8750
Cross Travel (Decimal Inch) 12.5000
Knee Travel (Decimal Inch) 14.5000
Number of Spindle Speeds 16
Maximum Spindle Speed (RPM) 5440.00
Minimum Spindle Speed (RPM) 80.00
Spindle Travel Length (Inch) 4-1/2
Spindle Taper Size R8
Quill Diameter (Inch) 3-3/8
Quill Diameter (Decimal Inch) 3.3750
Maximum Spindle To Column Distance (Decimal Inch) 4.5000
Table Load Capacity (Lb.) 550.00
Number of T-Slots 2
Left-Hand Head Tilt (Degrees) 90.00
Right-Hand Head Tilt (Degrees) 90.00
Forward Head Tilt (Degrees) 45.00
Backward Head Tilt (Degrees) 45.00
Ram Travel Length (Inch) 13-3/8
Horsepower (HP) 2.00
Voltage 230
Overall Length (Decimal Inch) 64.0000
Overall Height (Inch) 82
Overall Depth (Decimal Inch) 57.0000

$14,849.01

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Jet - 9" Table Width x 49" Table Length, Electronic Variable Speed Control, 3 Phase Knee Milling Machine - R8 Spindle Taper, 3 hp - Best Tool & Supply

Jet - 9" Table Width x 49" Table Length, Electronic Variable Speed Control, 3 Phase Knee Milling Machine - R8 Spindle Taper, 3 hp


Item #: 30170500
Brand: Jet
Model #: 894357
Exact Tooling IR#: 04

Features and Benefits

Electronic Variable Speed control (EVS, are similar to variable speed pulleys, but the speed is controlled electronically rather than manually by turning a dial. They feature several speeds within a specified speed range.
Three-phase refers to three individual lines (coils) that connect to and run voltage through the motor. Each line alternates in a sequence as they reach their voltage peak. They provide a more stable flow of voltage and more horsepower to the equipment.
Product Specifications
Spindle Speed Control Electronic Variable Speed
Table Length (Inch) 49
Table Width (Inch) 9
Phase 3
Longitudinal Travel (Decimal Inch) 36.0000
Cross Travel (Decimal Inch) 16.0000
Knee Travel (Decimal Inch) 14.0000
Number of Spindle Speeds Variable
Maximum Spindle Speed (RPM) 5000.00
Minimum Spindle Speed (RPM) 60.00
Includes EVS-949 Mill with 2-Axis Newall DP700 DRO and X, Y, Z-Axis JET Powerfeeds and KURT Powered Draw Bar
Spindle Travel Length (Decimal Inch) 5.0000
Spindle Taper Size R8
Quill Diameter (Decimal Inch) 3.3750
Minimum Spindle to Table Distance (Decimal Inch) 18.7500
Maximum Spindle to Table Distance (Decimal Inch) 18.7500
Minimum Spindle to Column Distance (Decimal Inch) 21.4000
Maximum Spindle To Column Distance (Decimal Inch) 21.4000
Table Load Capacity (Lb.) 550.00
Number of T-Slots 3
Left-Hand Head Tilt (Degrees) 45.00
Right-Hand Head Tilt (Degrees) 90.00
Ram Travel Length (Inch) 14
Horsepower (HP) 3.00
Voltage 230
Overall Length (Decimal Inch) 68.0000
Overall Height (Inch) 84
Overall Depth (Inch) 63
Certification CSA/UL
Warranty Mfr's 3 Year Warranty

$35,300.38

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Interstate - Steel Rake - 19" OAL - Best Tool & Supply

Interstate - Steel Rake - 19" OAL


Item #: 33663022
Brand: Interstate
Exact Tooling IR#: 04

Product Specifications
Product Type Rake
Material Steel
Overall Length (Decimal Inch) 19.0000
Handle Material Rubber Grip

$98.54

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Jet - 10" Table Width x 50" Table Length, Electronic Variable Speed Control, 3 Phase Knee Milling Machine - 3 hp - Best Tool & Supply

Jet - 10" Table Width x 50" Table Length, Electronic Variable Speed Control, 3 Phase Knee Milling Machine - 3 hp


Item #: 35294362
Brand: Jet
Model #: 690622
Exact Tooling IR#: 04

Features and Benefits

Electronic Variable Speed control (EVS, are similar to variable speed pulleys, but the speed is controlled electronically rather than manually by turning a dial. They feature several speeds within a specified speed range.
Three-phase refers to three individual lines (coils) that connect to and run voltage through the motor. Each line alternates in a sequence as they reach their voltage peak. They provide a more stable flow of voltage and more horsepower to the equipment.
Product Specifications
Spindle Speed Control Electronic Variable Speed
Table Length (Inch) 50
Table Width (Inch) 10
Phase 3
Longitudinal Travel (Decimal Inch) 35.3333
Cross Travel (Decimal Inch) 14.7500
Knee Travel (Decimal Inch) 16.1250
Number of Spindle Speeds Variable
Maximum Spindle Speed (RPM) 4500.00
Minimum Spindle Speed (RPM) 60.00
Includes Air Powered Draw Bar; Acu-Rite 200S DRO System; X and Y-Axis Powerfeeds
Spindle Travel Length (Decimal Inch) 5.0000
Quill Diameter (Inch) 3-3/8
Maximum Spindle to Table Distance (Decimal Inch) 20.7500
Number of T-Slots 3
Horsepower (HP) 3.00
Voltage 230
Warranty 2 Year

$26,027.19

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It