Hubbell Wiring Device-Kellems - 2 Poles, 60 Amp, Open Toggle Manual Motor Starter - 85.9mm Wide x 44.5mm Deep x 96mm High, 20 hp, CSA Certified & UL Listed

Item #: 73122079
Brand: Hubbell Wiring Device-Kellems
Model #: HBL7862FW
Exact Tooling IR#: 04

Features and Benefits

Non-NEMA refers to the dimensions outside the parameters of the motor's dimensions within the standard NEMA designations for motor frame size

Toggle switches are designed for safety and speed of an operation. They closes or open contacts with a lever.

Open housings are designed to disconnect the motor from the line at the time of starting or stopping of equipment. Ideal for inertial loads and they are finger safe.

Product Specifications
Starter Type	NonNEMA
Amperage	60
Operator Type	Toggle
Enclosure Type	Open
Horsepower (HP)	20
Number of Poles	2
Overall Height (mm)	96
Overall Height (Decimal Inch)	3.7800
Overall Width (mm)	85.90
Overall Width (Decimal Inch)	3.3800
Overall Depth (mm)	44-1/2
Overall Depth (Decimal Inch)	1-3/4
Standards Met	CSA Certified; UL Listed

Product Specifications

Starter Type NonNEMA

Amperage 60

Operator Type Toggle

Enclosure Type Open

Horsepower (HP) 20

Number of Poles 2

Overall Height (mm) 96

Overall Height (Decimal Inch) 3.7800

Overall Width (mm) 85.90

Overall Width (Decimal Inch) 3.3800

Overall Depth (mm) 44-1/2

Overall Depth (Decimal Inch) 1-3/4

Standards Met CSA Certified; UL Listed

$301.64

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Eaton Cutler-Hammer - Starter Heater - For Use with MS Starters

Item #: 01260058
Brand: Eaton Cutler-Hammer
Model #: MSH17-1A
Exact Tooling IR#: 04

Product Specifications
Starter Accessory Type	Heater
For Use With	MS Starters

$67.94

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Schneider Electric - Plastic, Starter Enclosure - For Use with Kaedra

Item #: 56784788
Brand: Schneider Electric
Model #: 13958
Exact Tooling IR#: 04

Product Specifications
Starter Accessory Type	Enclosure
For Use With	Kaedra
Material	Plastic
Includes	Marking Kit; Terminal Block 8 Holes; Terminal Block Support

$234.53

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Schneider Electric - 60 to 100 Amp, 1,000 VAC, Thermal IEC Overload Relay - Trip Class 10, For Use with LC1F115 and LC1F185

Item #: 69648566
Brand: Schneider Electric
Model #: LR9F5367
Exact Tooling IR#: 04

Product Specifications
Starter Type	IEC
For Use With	LC1F115; LC1F185
Voltage	1000 VAC
Maximum Overload (A)	100
Sensing Method	Thermal
Minimum Overload (A)	60
Trip Class	10
Overall Height (mm)	96
Overall Width (mm)	123-1/2
Standards Met	EN/IEC 60947-4-1; IEC 60255-17; IEC 60255-8; VDE 0660

$444.83

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Schneider Electric - 23 to 32 Amp, 690 VAC, Thermal IEC Overload Relay - Trip Class 10A, For Use with LC1D25 and LC1D38

Item #: 56805328
Brand: Schneider Electric
Model #: LRD326
Exact Tooling IR#: 04

Product Specifications
Starter Type	IEC
For Use With	LC1D25; LC1D38
Voltage	690 VAC
Maximum Overload (A)	32
Sensing Method	Thermal
Minimum Overload (A)	23
Trip Class	10A
Overall Width (mm)	70
Standards Met	ATEX 94/9/CE; CSA C22.2 No. 14; EN/IEC 60947-4-1; EN/IEC 60947-5-1; RoHS Compliant; UL 508

$109.29

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Schneider Electric - 30 to 40 Amp, 690 VAC, Thermal IEC Overload Relay - Trip Class 20, For Use with LC1D40A and LC1D65A

Item #: 69527455
Brand: Schneider Electric
Model #: LRD340L
Exact Tooling IR#: 04

Product Specifications
Starter Type	IEC
For Use With	LC1D40A; LC1D65A
Voltage	690 VAC
Maximum Overload (A)	40
Sensing Method	Thermal
Minimum Overload (A)	30
Trip Class	20
Overall Height (mm)	70
Overall Width (mm)	123
Standards Met	ATEX 94/9/CE; CSA C22.2 No. 14; EN/IEC 60947-4-1; EN/IEC 60947-5-1; RoHS Compliant; UL 508

$149.02

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Schneider Electric - 63 to 80 Amp, 690 VAC, Thermal IEC Overload Relay - Trip Class 20, For Use with LC1D80 and LC1D95

Item #: 69527547
Brand: Schneider Electric
Model #: LR3D3563
Exact Tooling IR#: 04

Product Specifications
Starter Type	IEC
For Use With	LC1D80; LC1D95
Voltage	690 VAC
Maximum Overload (A)	80
Sensing Method	Thermal
Minimum Overload (A)	63
Trip Class	20
Overall Width (mm)	121
Standards Met	ATEX 94/9/CE; CSA C22.2 No. 14; EN/IEC 60947-4-1; EN/IEC 60947-5-1; UL 508

$177.68

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Schneider Electric - 3 Pole, NEMA Size 00-1, 4 to 6 Amp, 690 VAC, Thermal NEMA Overload Relay - Trip Class 20, For Use with LC1D09, LC1D12, LC1D18, LC1D25, LC1D32 and LC1D38

Item #: 69527182
Brand: Schneider Electric
Model #: LRD10L
Exact Tooling IR#: 04

Product Specifications
Starter Type	NEMA
NEMA Size	00-1
For Use With	LC1D09; LC1D12; LC1D18; LC1D25; LC1D32; LC1D38
Voltage	690 VAC
Maximum Overload (A)	6
Sensing Method	Thermal
Minimum Overload (A)	4
Trip Class	20
Number of Poles	3
Overall Depth (mm)	76.10
Overall Depth (Inch)	3
Overall Width (Decimal Inch)	1.7700
Overall Width (mm)	45
Standards Met	ABS; ATEX D 94/9/CE; ATEX INERIS; CSA; CSA C22.2 No. 14; EAC; EN 60947-4-1; EN 60947-5-1; IEC 60947-4-1; IEC 60947-5-1; UL; UL 508

$83.02

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Square D - NEMA Size 2, 600 VAC, Thermal NEMA Overload Relay

Item #: 69651230
Brand: Square D
Model #: 9065SEO8
Exact Tooling IR#: 04

Product Specifications

NEMA Size 2, 600 VAC, Thermal NEMA Overload Relay -

Starter Type NEMA

NEMA Size 2

Voltage 600 VAC

Sensing Method Thermal

Overall Height (Decimal Inch) 3.3100

Overall Depth (Decimal Inch) 3.9700

Overall Width (Decimal Inch) 3-1/2

Standards Met CE; CSA; UL Listed

$223.86

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Square D - Starter Control Unit - For Use with Enclosures

Item #: 54525894
Brand: Square D
Model #: 9999SA10
Exact Tooling IR#: 04

Product Specifications
Starter Accessory Type	Control Unit
For Use With	Enclosures
Includes	Starter Kit

$188.64

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Square D - 3 Poles, 30 Amp, Open Toggle Manual Motor Starter - 1 hp at 90 VDC, 10 hp at 460 VAC, 10 hp at 575 VAC, 1-1/2 hp at 230 VDC, 2 hp at 115 VAC, 2 hp at 115 VDC & 7-1/2 hp at 230 VAC, CE, CSA & UL Recognized

Item #: 69524791
Brand: Square D
Model #: 2510KO2
Exact Tooling IR#: 04

Features and Benefits

Non-NEMA refers to the dimensions outside the parameters of the motor's dimensions within the standard NEMA designations for motor frame size

Toggle switches are designed for safety and speed of an operation. They closes or open contacts with a lever.

Open housings are designed to disconnect the motor from the line at the time of starting or stopping of equipment. Ideal for inertial loads and they are finger safe.

Product Specifications
Starter Type	NonNEMA
Amperage	30
Operator Type	Toggle
Enclosure Type	Open
Horsepower (HP)	1 @ 90 VDC; 10 @ 460 VAC; 10 @ 575 VAC; 1-1/2 @ 230 VDC; 2 @ 115 VAC; 2 @ 115 VDC; 7-1/2 @ 230 VAC
Number of Poles	3
Standards Met	CE; CSA; UL Recognized

Product Specifications

Starter Type NonNEMA

Amperage 30

Operator Type Toggle

Enclosure Type Open

Horsepower (HP) 1 @ 90 VDC; 10 @ 460 VAC; 10 @ 575 VAC; 1-1/2 @ 230 VDC; 2 @ 115 VAC; 2 @ 115 VDC; 7-1/2 @ 230 VAC

Number of Poles 3

Standards Met CE; CSA; UL Recognized

$162.62

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Schneider Electric - Starter Reverser Block - For Use with TeSys U

Item #: 56804537
Brand: Schneider Electric
Model #: LU2MB0B
Exact Tooling IR#: 04

Product Specifications
Starter Accessory Type	Reverser Block
For Use With	TeSys U

$290.52

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Eaton Cutler-Hammer - 3 Pole, 110 VAC at 50 Hz, 120 VAC at 60 Hz and 600 Volt, 45 Continuous Amp, 1 hp, Open NEMA Combination Starter - ABS Type Approved, cUL Listed, NEMA ICS 2-1993, UL Listed

Item #: 02353167
Brand: Eaton Cutler-Hammer
Model #: CN15GN3AB
Exact Tooling IR#: 04

Features and Benefits

National Electrical Manufacturers' Association (NEMA) starters are electrically controlled switches used to rapidly open (break) and close (make) a circuit. They are larger than the International Electrotechnical Commission (IEC) starters and are considred more rugged and durable.

Open housings are designed to disconnect the motor from the line at the time of starting or stopping of equipment. Ideal for inertial loads and they are finger safe.

Single or three-phase refers to either a single coil or three individual coils that connect to and run voltage through the connector. Single-phase lines are used for light-to-medium operations and three-phase lines are used for medium-to-heavy operations.

Non-reversing starters are designed with one phase line that connects to and runs voltage through the motor. The starter is used to turn a motor on and off.

Product Specifications
Continuous Amperage	45
Starter Type	NEMA
Enclosure Type	Open
Compatible Motor Phase	Single Phase, Three Phase
Action	NonReversible
Voltage	110 VAC @ 50 Hz; 120 VAC @ 60 Hz; 600 V
Number of Poles	3
Horsepower (HP)	1
Overall Height (mm)	128.30
Overall Height (Decimal Inch)	5.0500
Overall Width (Decimal Inch)	2.5600
Overall Width (mm)	65
Overall Depth (mm)	112.80
Overall Depth (Decimal Inch)	4.4400
Standards Met	ABS Type Approved; cUL Listed; NEMA ICS 2-1993; UL Listed

Product Specifications

Continuous Amperage 45

Starter Type NEMA

Enclosure Type Open

Compatible Motor Phase Single Phase, Three Phase

Action NonReversible

Voltage 110 VAC @ 50 Hz; 120 VAC @ 60 Hz; 600 V

Number of Poles 3

Horsepower (HP) 1

Overall Height (mm) 128.30

Overall Height (Decimal Inch) 5.0500

Overall Width (Decimal Inch) 2.5600

Overall Width (mm) 65

Overall Depth (mm) 112.80

Overall Depth (Decimal Inch) 4.4400

Standards Met ABS Type Approved; cUL Listed; NEMA ICS 2-1993; UL Listed

$1,579.39

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Square D - 1 Pole, 16 Amp, NEMA, Enclosed Toggle Manual Motor Starter - 1 hp at 115 VAC, 1 hp at 230 VAC, 1 hp at 277 VAC, CE, CSA, NEMA 3R/7/9 & UL Listed

Item #: 56821952
Brand: Square D
Model #: 2510FR1H
Exact Tooling IR#: 04

Features and Benefits

National Electrical Manufacturers' Association (NEMA) starters are electrically controlled switches used to rapidly open (break) and close (make) a circuit. They are larger than the International Electrotechnical Commission (IEC) starters and are considred more rugged and durable.

Toggle switches are designed for safety and speed of an operation. They closes or open contacts with a lever.

Enclosed housings are designed to ensure that the motor is never disconnected from power during starting. Ideal for frictional loads and prevention of electrical shocks and dust.

Product Specifications

Starter Type NEMA

Amperage 16

Operator Type Toggle

Enclosure Type Enclosed

Horsepower (HP) 1 @ 115 VAC; 1 @ 230 VAC; 1 @ 277 VAC

Number of Poles 1

Standards Met CE; CSA; NEMA 3R/7/9; UL Listed

$583.15

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Schneider Electric - 18 Amp, 230 Coil VAC at 50/60 Hz, Nonreversible Enclosed IEC Motor Starter - Pushbutton Start (Green I), Pushbutton Stop/Reset (Red O)

Item #: 56805013
Brand: Schneider Electric
Model #: LE1D18P7
Exact Tooling IR#: 04

Features and Benefits

IEC contators without thermal overload relays may have fixed thermal elements that require replacing the complete overload relay. This may occur when significant motor full load current changes are due to application requirements.

Non-reversing starters are designed with one phase line that connects to and runs voltage through the motor. The starter is used to turn a motor on and off.

Product Specifications
Starter Type	Contactor without Thermal Overload Relay
Amperage	18
Coil Voltage	230 VAC @ 50/60 Hz
Action	NonReversible
Motor Power	10 kW @ 500 VAC; 10 kW @ 660/690 VAC; 4 kW @ 220/230 VAC; 7.5 kW @ 380/400 VAC; 9 kW @ 415 VAC; 9 kW @ 440 VAC
Enclosure Type	Enclosed
Operator Type	Pushbutton Start (Green I); Pushbutton Stop/Reset (Red O)
Overall Height (mm)	201
Overall Width (mm)	101
Overall Depth (mm)	153
Standards Met	AC-3; IEC 60529; IEC 60947-4-1; RoHS Compliant

Product Specifications

Starter Type Contactor without Thermal Overload Relay

Amperage 18

Coil Voltage 230 VAC @ 50/60 Hz

Action NonReversible

Motor Power 10 kW @ 500 VAC; 10 kW @ 660/690 VAC; 4 kW @ 220/230 VAC; 7.5 kW @ 380/400 VAC; 9 kW @ 415 VAC; 9 kW @ 440 VAC

Enclosure Type Enclosed

Operator Type Pushbutton Start (Green I); Pushbutton Stop/Reset (Red O)

Overall Height (mm) 201

Overall Width (mm) 101

Overall Depth (mm) 153

Standards Met AC-3; IEC 60529; IEC 60947-4-1; RoHS Compliant

$295.04

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Schneider Electric - Starter Control Unit - For Use with LUFC00, LUFDA01, LUFDA10, LUFDH11, LUFN, LUFV2, LUFW10

Item #: 56829542
Brand: Schneider Electric
Model #: LUCDX6FU
Exact Tooling IR#: 04

Product Specifications
Starter Accessory Type	Control Unit
For Use With	LUFC00; LUFDA01; LUFDA10; LUFDH11; LUFN; LUFV2; LUFW10

$226.97

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Schneider Electric - 17 to 25 Amp, 690 VAC, Thermal IEC Overload Relay - Trip Class 20, For Use with LC1D80 and LC1D95

Item #: 54529896
Brand: Schneider Electric
Model #: LR2D3522
Exact Tooling IR#: 04

Product Specifications
Starter Type	IEC
For Use With	LC1D80; LC1D95
Voltage	690 VAC
Maximum Overload (A)	25
Sensing Method	Thermal
Minimum Overload (A)	17
Trip Class	20
Overall Height (mm)	100
Overall Width (mm)	121
Standards Met	ATEX 94/9/CE; CSA C22.2 No. 14; EN/IEC 60947-4-1; EN/IEC 60947-5-1; UL 508

$150.45

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Schneider Electric - 48 to 65 Amp, 690 VAC, Thermal IEC Overload Relay - Trip Class 20, For Use with LC1D80 and LC1D95

Item #: 69648178
Brand: Schneider Electric
Model #: LR3D3559
Exact Tooling IR#: 04

Product Specifications
Starter Type	IEC
For Use With	LC1D80; LC1D95
Voltage	690 VAC
Maximum Overload (A)	65
Sensing Method	Thermal
Minimum Overload (A)	48
Trip Class	20
Overall Width (mm)	121
Standards Met	ATEX 94/9/CE; CSA C22.2 No. 14; EN/IEC 60947-4-1; EN/IEC 60947-5-1; UL 508

$149.68

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Schneider Electric - 37 to 50 Amp, 690 VAC, Thermal IEC Overload Relay - Trip Class 20, For Use with LC1D40A and LC1D65A

Item #: 69527471
Brand: Schneider Electric
Model #: LRD350L
Exact Tooling IR#: 04

Product Specifications
Starter Type	IEC
For Use With	LC1D40A; LC1D65A
Voltage	690 VAC
Maximum Overload (A)	50
Sensing Method	Thermal
Minimum Overload (A)	37
Trip Class	20
Overall Height (mm)	70
Overall Width (mm)	123
Standards Met	ATEX 94/9/CE; CSA C22.2 No. 14; EN/IEC 60947-4-1; EN/IEC 60947-5-1; RoHS Compliant; UL 508

$148.77

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Schneider Electric - 0.1 to 0.16 Amp, 690 VAC, Thermal IEC Overload Relay - Trip Class 10A, For Use with LC1D09 and LC1D38

Item #: 69648368
Brand: Schneider Electric
Model #: LRD01
Exact Tooling IR#: 04

Product Specifications
Starter Type	IEC
For Use With	LC1D09; LC1D38
Voltage	690 VAC
Maximum Overload (A)	0.16
Sensing Method	Thermal
Minimum Overload (A)	0.10
Trip Class	10A
Overall Width (mm)	70
Standards Met	ATEX 94/9/CE; CSA C22.2 No. 14; EN/IEC 60947-4-1; EN/IEC 60947-5-1; RoHS Compliant; UL 508

$75.56

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It