Y-AXIS POWERFEED

Item #: PR67510Y
Manufacturer: PRM
Mfg #:

Technical Specifications:
•Brand Name: PRM •Description: Y-Axis •Model Number: AL-510Y •Weight: 16.5 lbs

Description:
•Maximum Torque: 650 in/lbs •Voltage 110V 50/60Hz •Speed Range 0 to 180 RPM

Shipping Info:
•Actual Weight - 16.5000 •Dimensions - Height: 1.00 Length: 1.00 Width: 1.00

$484.36

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Cross Power Feed - 150 inch/lbs; For Acer 3VS & 3VK

Item #: JD80M9508150
Manufacturer: Servo
Mfg #: M-9508-150

Technical Specifications:
•Brand Name: Servo •Description: Y-Axis Cross Feed •For Use With: Acer 3VS & 3VK, Kent 3VK, 4VK & 5VK •Model Number: M-9508-150 •Type: 150

Description:
•Semi-automated machining on Class 1 mills to 3 hp. •Peak Torque (full-wave SCR control compound DC motor): to 150 in.- lb. / 17 NM torque •Intermittent Torque: 120 in.- lb. / 13.6 NM •Continuous Torque: 100 in.- lb. / 11.3 NM •Variable Feed Rate: .50-35 IPM / 13-889 mm/min •Gear Reduction Ratio (motor to screw shaft): 72:1. •Helical gearing and torque limiting friction safety clutch with new and improved gear •Electrical: 110V, 50/60 Hz, 2.5A. •Approx. weight: 15 lb. / 6.8 kg.

Shipping Info:
•Actual Weight - 16.7500 •Shipping Weight - 18.0000 •Dimensions - Height: 23.3 Length: 8.00 Width: 12.9

$1,059.47

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Z-AXIS POWERFEED

Item #: PR67510Z
Manufacturer: PRM
Mfg #:

Technical Specifications:
•Brand Name: PRM •Description: Z-Axis •Model Number: AL-510Z •Weight: 16.5 lbs

Description:
•Maximum Torque: 650 in/lbs •Voltage 110V 50/60Hz •Speed Range 0 to 180 RPM

Shipping Info:
•Actual Weight - 16.5000 •Dimensions - Height: 1.00 Length: 1.00 Width: 1.00

$484.36

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

5567 Circuit Board for Type 150 Powerfeed

Item #: JD805567
Manufacturer: Servo
Mfg #:

Technical Specifications:
•Brand Name: Servo •Model Number: 5567 •Type: Parts

Description:

Shipping Info:
•Actual Weight - .1500 •Dimensions - Height: 1.10 Length: 6.00 Width: 4.00

$114.68

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Table Power Feed - 150 inch/lbs; For All Purpose

Item #: JD80M2500150
Manufacturer: Servo
Mfg #: M-2500-150

Technical Specifications:
•Brand Name: Servo •Description: X, Y & Z Axis Powerfeed •For Use With: General Purpose •Model Number: M-2500-150 •Type: 150

Description:
•Semi-automated machining on Class 1 mills to 3 hp. •Peak Torque (full-wave SCR control compound DC motor): to 150 in.- lb. / 17 NM torque •Intermittent Torque: 120 in.- lb. / 13.6 NM •Continuous Torque: 100 in.- lb. / 11.3 NM •Variable Feed Rate: .50-35 IPM / 13-889 mm/min •Gear Reduction Ratio (motor to screw shaft): 72:1. •Helical gearing and torque limiting friction safety clutch with new and improved gear •Electrical: 110V, 50/60 Hz, 2.5A. •Approximate weight: 15 lb. / 6.8 kg.

Shipping Info:
•Actual Weight - 12.6500 •Dimensions - Height: 14.8 Length: 12.3 Width: 7.30

$821.88

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Cross Power Feed - 140 inch/lbs; For Acer 3VS & 3VK

Item #: JD80M9508140
Manufacturer: Servo
Mfg #: M-9508-140

Technical Specifications:
•Brand Name: Servo •Description: Y-Axis Cross Feed •For Use With: Acer 3VS & 3VK, Kent 3VK, 4VK & 5VK •Model Number: M-9508-140 •Type: 140

Description:
•Semi-automated machining on Class 1 mills to 3 hp. •Peak Torque (half-wave series motor): to 140 in.- lb. / 15.8 NM torque •Intermittent Torque: 105 in.- lb. / 11.9 NM •Continuous Torque: 90 in.- lb. / 10.2 NM •Variable Feed Rate: .75-25 IPM / 19-635 mm/min (table & cross), .5-12 IPM / 13-305 mm/min (knee) •Gear Reduction Ratio (motor to screw shaft): 72:1. •Helical gearing and torque limiting friction safety clutch with new and improved gear •Electrical: 110V, 50/60 Hz, 2.5A. •Approx. weight: 15 lb. / 6.8 kg.

Shipping Info:
•Actual Weight - 16.2000 •Dimensions - Height: 23.4 Length: 8.00 Width: 12.4

$939.14

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Limit Switch Assembly for Type 150 Powerfeed

Item #: JD8020247
Manufacturer: Servo
Mfg #: 2024-7

Technical Specifications:
•Brand Name: Servo •Model Number: 20247 •Type: Parts

Description:

Shipping Info:
•Actual Weight - .4500 •Dimensions - Height: 1.27 Length: 12.7 Width: 9.00

$78.13

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Limit Switch Assembly for Type 140 Powerfeed

Item #: JD8020237
Manufacturer: Servo
Mfg #: 2023-10

Technical Specifications:
•Brand Name: Servo •Model Number: 20237 •Type: Parts

Description:

Shipping Info:
•Actual Weight - .4500 •Dimensions - Height: 1.20 Length: 9.00 Width: 9.00

$72.75

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

PRM Power Feed - RF30BPFT;

Item #: RL80RF30BPFT
Manufacturer: PRM
Mfg #:

Technical Specifications:
•Brand Name: PRM •Description: X-Axis Powerfeed •For Use With: RF311 Mill/Drill •Model Number: RF30BPFT •Type: Power Feed •Weight: 15 lbs

Description:
•Mill/Drill Powerfeed •For bench milling and drilling style machines •0-270 RPM •2.8:1 Drive gear rate •560 in/lb Maximum torque

Shipping Info:
•Actual Weight - 13.9500 •Dimensions - Height: 12.6 Length: 10.6 Width: 6.90

$596.52

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Table Power Feed - For Bridgeport Electronic

Item #: JD80M0206150
Manufacturer: Servo
Mfg #: M-0206-150

Technical Specifications:
•Brand Name: Servo •Description: X-Axis Table Feed •For Use With: Bridgeport (replaces electronic feed) •Model Number: M-0206-150 •Type: 150

Description:
•Semi-automated machining on Class 1 mills to 3 hp. •Peak Torque (full-wave SCR control compound DC motor): to 150 in.- lb. / 17 NM torque •Intermittent Torque: 120 in.- lb. / 13.6 NM •Continuous Torque: 100 in.- lb. / 11.3 NM •Variable Feed Rate: .50-35 IPM / 13-889 mm/min •Gear Reduction Ratio (motor to screw shaft): 72:1. •Helical gearing and torque limiting friction safety clutch with new and improved gear •Electrical: 110V, 50/60 Hz, 2.5A. •Approximate weight: 15 lb. / 6.8 kg.

Shipping Info:
•Actual Weight - 15.8000 •Dimensions - Height: 14.7 Length: 12.2 Width: 7.60

$1,117.59

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Knee Powerfeed Type 200 Acer

Item #: JD80M9811200
Manufacturer: Servo
Mfg #: M-9811-200

Technical Specifications:
•Brand Name: Servo •Description: Z-Axis Knee Feed •For Use With: Acer 3VS & 3VK after 1992 •Model Number: M-9811-200 •Type: 200

Description:
•Semi-automated machining on Class 1 mills to 5 hp. •Peak Torque (half-wave series motor): to 200 in.- lb. / 22.6 NM torque •Intermittent Torque: 150 in.- lb. / 17 NM •Continuous Torque: 120 in.- lb. / 13 NM •Variable Feed Rate: .5-12 IPM / 13-305 mm/min (knee) •Rapid Traverse: 15IPM / 381 mm/min. (knee) •Gear Reduction Ratio (motor to screw shaft): 72:1. •Helical gearing and torque limiting friction safety clutch with new and improved gear •Electrical: 110V, 50/60 Hz, 4.0A. •Approx. weight: 21 lb. / 9.4 kg.

Shipping Info:
•Actual Weight - 18.1000 •Dimensions - Height: 12.5 Length: 23.5 Width: 8.00

$1,030.92

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

04103 Circuit Breaker Type 150

Item #: JD8004103
Manufacturer: Servo
Mfg #: 4103

Technical Specifications:
•Brand Name: Servo •Description: 04103 Circuit Breaker Type 150 •Model Number: 04103 •Type: Parts

Description:

Shipping Info:
•Actual Weight - .0500 •Dimensions - Height: .700 Length: 5.75 Width: 3.00

$30.89

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Knee Powerfeed Type 200 for Bridgeport

Item #: JD80M0280200
Manufacturer: Servo
Mfg #: M-0280-200

Technical Specifications:
•Brand Name: Servo •Description: Z-Axis Knee Feed •For Use With: Bridgeport Series I •Model Number: M-0280-200 •Type: 200

Description:
•Semi-automated machining on Class 1 mills to 5 hp. •Peak Torque (half-wave series motor): to 200 in.- lb. / 22.6 NM torque •Intermittent Torque: 150 in.- lb. / 17 NM •Continuous Torque: 120 in.- lb. / 13 NM •Variable Feed Rate: .5-12 IPM / 13-305 mm/min (knee) •Rapid Traverse: 15IPM / 381 mm/min. (knee) •Gear Reduction Ratio (motor to screw shaft): 72:1. •Helical gearing and torque limiting friction safety clutch with new and improved gear •Electrical: 110V, 50/60 Hz, 4.0A. •Approximate weight: 21 lb. / 9.4 kg.

Shipping Info:
•Actual Weight - 17.4500 •Shipping Weight - 18.0000 •Dimensions - Height: 23.4 Length: 7.80 Width: 12.8

$878.98

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Table Power Feed - 140 inch/lbs; For Acer 3VS & 3VK

Item #: JD80M9108140
Manufacturer: Servo
Mfg #: M-9108-140

Technical Specifications:
•Brand Name: Servo •Description: X-Axis Table Feed •For Use With: Acer 3VS & 3VK, Kent 3VK, 4VK & 5VK •Model Number: M-9108-140 •Type: 140

Description:
•Semi-automated machining on Class 1 mills to 3 hp. •Peak Torque (half-wave series motor): to 140 in.- lb. / 15.8 NM torque •Intermittent Torque: 105 in.- lb. / 11.9 NM •Continuous Torque: 90 in.- lb. / 10.2 NM •Variable Feed Rate: .75-25 IPM / 19-635 mm/min (table & cross), .5-12 IPM / 13-305 mm/min (knee) •Gear Reduction Ratio (motor to screw shaft): 72:1. •Helical gearing and torque limiting friction safety clutch with new and improved gear •Electrical: 110V, 50/60 Hz, 2.5A. •Approx. weight: 15 lb. / 6.8 kg.

Shipping Info:
•Actual Weight - 13.9000 •Dimensions - Height: 14.7 Length: 12.6 Width: 7.60

$793.33

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Cross Power Feed - For Bridgeport; Millport

Item #: JD80M0250140
Manufacturer: Servo
Mfg #: M-0250-140

Technical Specifications:
•Brand Name: Servo •Description: Y-Axis Cross Feed •For Use With: Bridgeport 12" Cross Travel •Model Number: M-0250-140 •Type: 140

Description:
•Semi-automated machining on Class 1 mills to 3 hp. •Peak Torque (half-wave series motor): to 140 in.- lb. / 15.8 NM torque •Intermittent Torque: 105 in.- lb. / 11.9 NM •Continuous Torque: 90 in.- lb. / 10.2 NM •Variable Feed Rate: .75-25 IPM / 19-635 mm/min (table & cross), .5-12 IPM / 13-305 mm/min (knee) •Gear Reduction Ratio (motor to screw shaft): 72:1. •Helical gearing and torque limiting friction safety clutch with new and improved gear •Electrical: 110V, 50/60 Hz, 2.5A. •Approximate weight: 15 lb. / 6.8 kg.

Shipping Info:
•Actual Weight - 16.6000 •Shipping Weight - 18.0000 •Dimensions - Height: 23.5 Length: 12.5 Width: 8.00

$817.80

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Table Power Feed - 150 inch/lbs; For Acer 3VS & 3VK

Item #: JD80M9108150
Manufacturer: Servo
Mfg #: M-9108-150

Technical Specifications:
•Brand Name: Servo •Description: X-Axis Table Feed •For Use With: Acer 3VS & 3VK, Kent 3VK, 4VK & 5VK •Model Number: M-9108-150 •Type: 150

Description:
•Semi-automated machining on Class 1 mills to 3 hp. •Peak Torque (full-wave SCR control compound DC motor): to 150 in.- lb. / 17 NM torque •Intermittent Torque: 120 in.- lb. / 13.6 NM •Continuous Torque: 100 in.- lb. / 11.3 NM •Variable Feed Rate: .50-35 IPM / 13-889 mm/min •Gear Reduction Ratio (motor to screw shaft): 72:1. •Helical gearing and torque limiting friction safety clutch with new and improved gear •Electrical: 110V, 50/60 Hz, 2.5A. •Approx. weight: 15 lb. / 6.8 kg.

Shipping Info:
•Actual Weight - 13.7000 •Dimensions - Height: 15.0 Length: 12.6 Width: 7.40

$914.67

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Align Table Power Feed - AL500SY; Y-Axis

Item #: JD30AL500SY
Manufacturer: Align
Mfg #:

Technical Specifications:
•Brand Name: Align •Description: Y-Axis •For Use With: Bridgeport Style Mills •Model Number: AL500SY •Type: Align Table Power Feed

Description:
•Easily mounts to almost any Bridgeport type knee mill, no modification necessary •Circuit panel is designed to accept replaceable insert type connectors •Nylon clutch has built-in torque release to prevent damage in the case of too much resistance •Standard Equipment: •On/off switch, forward, reverse, rapid traverse, jog button, 8' line cord, plug & mounting hardware AL500 Features:•Speed range: 0 to 160 RPM •Bevel Drive Gear Rate: 4.8:1 •Torque rating: 780 IN-LB (900Kgf/cm) •Power: 1 Amp/1 Phase/110 Volt •Weight: 15 lbs.

Shipping Info:
•Actual Weight - 15.2000 •Dimensions - Height: 14.6 Length: 10.7 Width: 7.00

$718.55

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Table Power Feed - For Bridgeport; Jet; Wilton

Item #: JD80M0200140
Manufacturer: Servo
Mfg #: M-0200-140

Technical Specifications:
•Brand Name: Servo •Description: X-Axis Table Feed •For Use With: Bridgeport Series 1 •Model Number: M-0200-140 •Type: 140

Description:
•Semi-automated machining on Class 1 mills to 3 hp. •Peak Torque (half-wave series motor): to 140 in.- lb. / 15.8 NM torque •Intermittent Torque: 105 in.- lb. / 11.9 NM •Continuous Torque: 90 in.- lb. / 10.2 NM •Variable Feed Rate: .75-25 IPM / 19-635 mm/min (table & cross), .5-12 IPM / 13-305 mm/min (knee) •Gear Reduction Ratio (motor to screw shaft): 72:1. •Helical gearing and torque limiting friction safety clutch with new and improved gear •Electrical: 110V, 50/60 Hz, 2.5A. •Approximate weight: 15 lb. / 6.8 kg.

Shipping Info:
•Actual Weight - 14.2500 •Dimensions - Height: 14.6 Length: 12.4 Width: 7.40

$739.28

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Align Table Power Feed - AL500SZ; Z-Axis

Item #: JD30AL500SZ
Manufacturer: Align
Mfg #:

Technical Specifications:
•Brand Name: Align •Description: Z-Axis •For Use With: Bridgeport Style Mills •Model Number: AL500SZ •Type: Align Table Power Feed

Description:
•Easily mounts to almost any Bridgeport type knee mill, no modification necessary •Circuit panel is designed to accept replaceable insert type connectors •Nylon clutch has built-in torque release to prevent damage in the case of too much resistance •Standard Equipment: •On/off switch, forward, reverse, rapid traverse, jog button, 8' line cord, plug & mounting hardware AL500 Features:•Speed range: 0 to 160 RPM •Bevel Drive Gear Rate: 4.8:1 •Torque rating: 780 IN-LB (900Kgf/cm) •Power: 1 Amp/1 Phase/110 Volt •Weight: 15 lbs.

Shipping Info:
•Actual Weight - 64.6000 •Dimensions - Height: 10.6 Length: 18.0 Width: 10.9

$735.20

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Zytel Gear & Hub Assembly for Type 140/150 Powerfeeds

Item #: JD80B4737
Manufacturer: Servo
Mfg #: 4737

Technical Specifications:
•Brand Name: Servo •Model Number: B4737 •Type: Parts

Description:

Shipping Info:
•Actual Weight - .7500 •Dimensions - Height: 1.22 Length: 10.0 Width: 6.00

$44.82

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It