4 x 18 - Oversize High Carbon, High Chromium Precision Ground Flat Stock

Item #: LY4369445
Manufacturer: Starrett
Mfg #: 69445

Technical Specifications:
*Brand Name: Starrett *Length: 18 *Material: D-2 *Thick: 5/8 *Width: 3/4

Description:
*401 is (AISI D2) high chromium steel for the highest wear resistance applications *Standard size: +/-.001" thickness tolerance *High carbon, high chromium steel *For applications that demand the highest wear resistance 401 is standard tolerance *Ground straight and parallel

Shipping Info:
*Actual Weight - 2.3900

$200.59

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1/4 x 10 x 24 - 498 Low Carbon Precision Ground Flat Stock

Item #: LY8054948
Manufacturer: Starrett
Mfg #: 54948

Technical Specifications:
*Brand Name: Starrett *Length: 24 *Material: LC *Thick: 1/4 *Width: 10

Description:
*Substantial cost reductions over tool steel ground flat stock. There are savings up to 60% because this is a low carbon steel and furnished in 24" lengths. This means that you get one-third more steel at less cost * Ideal for a wide variety of parts that don't require more expensive heat treated steels, such as stripper plates, jigs, fixtures, machine and component parts, templates, etc. *This steel can be carburized or case hardened. After hardening, its physical properties, especially tensile strength, yield point, and Brinell hardness, are substantially higher. *Furnished in 24" (610mm) lengths, ground straight and parallel

Shipping Info:
*Actual Weight - 17.0000

$570.46

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

36 x 1 x 1-1/4 - Oil Hardening Flat Stock

Item #: LY4054501
Manufacturer: Starrett
Mfg #: 54501

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: O-1 *Thick: 1 *Width: 1-1/4

Description:
*Precision Ground 0-1 Gage Stock 36" Length *O-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 12.9100

$376.47

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

3/4 x 1-1/4 x 18 - 496 Oil Hardening Precsision Ground Flat Stock

Item #: LY4157044
Manufacturer: Starrett
Mfg #: 57044

Technical Specifications:
*Brand Name: Starrett *Length: 18 *Material: O-1 *Thick: 3/4 *Width: 1-1/4

Description:
*AISI 01 oil hardening tool steel. Standard size: +/-.001" thickness tolerance *Dimensionally stable -- can be used for intricate work including thin sections, with a minimum danger of cracking *Ground straight and parallel

Shipping Info:
*Actual Weight - 4.7800

$206.84

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

36 x 1 x 8 - Oil Hardening Flat Stock

Item #: LY5110012
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 36 *Material: O-1 *Thick: 1 *Width: 8

Description:
*Precision Ground 0-1 Gage Stock 36" Length *O-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 82.4700 *Addl Fee Over 70lb - $19.00 per item

$993.91

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

36 x 1 x 10 - Oil Hardening Flat Stock

Item #: LY5110013
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 36 *Material: O-1 *Thick: 1 *Width: 10

Description:
*Precision Ground 0-1 Gage Stock 36" Length *O-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 103.0800 *Addl Fee Over 70lb - $19.00 per item

$1,199.58

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

36 x 1 x 12 - Oil Hardening Flat Stock

Item #: LY5110014
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 36 *Material: O-1 *Thick: 1 *Width: 12

Description:
*Precision Ground 0-1 Gage Stock 36" Length *O-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 123.6900 *Addl Fee Over 70lb - $19.00 per item

$1,405.12

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1 x 8 x 36 - Oversize High Carbon, High Chromium Precision Ground Flat Stock

Item #: LY4358744
Manufacturer: Starrett
Mfg #: 58744

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: D-2 *Thick: 1 *Width: 8

Description:
*401 is (AISI D2) high chromium steel for the highest wear resistance applications *Standard size: +/-.001" thickness tolerance *High carbon, high chromium steel *For applications that demand the highest wear resistance 401 is standard tolerance *Ground straight and parallel

Shipping Info:
*Actual Weight - 81.5900 *Addl Fee Over 70lb - $19.00 per item

$2,733.39

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

18 x 1-1/2 x 10 - Oil Hardening Flat Stock

Item #: LY4054249
Manufacturer: Starrett
Mfg #: 54249

Technical Specifications:
*Brand Name: Starrett *Length: 18 *Material: O-1 *Thick: 1-1/2 *Width: 10

Description:
*Precision Ground 0-1 Gage Stock 18" Length *0-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450?_1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450?_1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125?_150?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 80.2400 *Addl Fee Over 70lb - $19.00 per item

$2,368.90

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

3/4 x 10 x 36 - Oversize Air Hardening Flat Stock

Item #: LY4657445
Manufacturer: Starrett
Mfg #: 57445

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: A-2 *Thick: 3/4 *Width: 10

Description:
*499 s a A-2 5% chromium air hardening steel with high wear and abrasion resistance *Oversize: +.010"/.015" thickness tolerance *Maintains close dimensional accuracy throughout the heat treating process *The 5% chromium content makes this steel especially desirable for punches and dies to be used in long production runs since it gives the tools far longer life. *Up to 50% more pieces per sharpening can be produced than with oil hardening steel *High wear resistance is also ideal for punches and dies to stamp silicon, stainless steels, monel metal and other types of abrasive material *Maintains close dimensional accuracy throughout the heat treating process. The wide 75? hardening range make this virtually foolproof *Full-length identification eliminates confusion with other steels *Furnished in 18" and 36" lengths, ground straight and parallel

Shipping Info:
*Actual Weight - 76.4900 *Addl Fee Over 70lb - $19.00 per item

$2,537.32

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

3/4 x 12 x 36 - Oversize Air Hardening Flat Stock

Item #: LY4657446
Manufacturer: Starrett
Mfg #: 57446

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: A-2 *Thick: 3/4 *Width: 12

Description:
*499 s a A-2 5% chromium air hardening steel with high wear and abrasion resistance *Oversize: +.010"/.015" thickness tolerance *Maintains close dimensional accuracy throughout the heat treating process *The 5% chromium content makes this steel especially desirable for punches and dies to be used in long production runs since it gives the tools far longer life. *Up to 50% more pieces per sharpening can be produced than with oil hardening steel *High wear resistance is also ideal for punches and dies to stamp silicon, stainless steels, monel metal and other types of abrasive material *Maintains close dimensional accuracy throughout the heat treating process. The wide 75? hardening range make this virtually foolproof *Full-length identification eliminates confusion with other steels *Furnished in 18" and 36" lengths, ground straight and parallel

Shipping Info:
*Actual Weight - 91.7900 *Addl Fee Over 70lb - $19.00 per item

$2,977.43

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1/2 x 14 x 36 - 496 Oil Hardening Precsision Ground Flat Stock

Item #: LY4058752
Manufacturer: Starrett
Mfg #: 58752

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: O-1 *Thick: 1/2 *Width: 14

Description:
*AISI 01 oil hardening tool steel. Standard size: +/-.001" thickness tolerance *Dimensionally stable -- can be used for intricate work including thin sections, with a minimum danger of cracking *Ground straight and parallel

Shipping Info:
*Actual Weight - 71.3900 *Addl Fee Over 70lb - $19.00 per item

$1,720.02

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

18 x 5/64 x 6 - Oil Hardening Flat Stock

Item #: LY4053977
Manufacturer: Starrett
Mfg #: 53977

Technical Specifications:
*Brand Name: Starrett *Length: 18 *Material: O-1 *Thick: 5/64 *Width: 6

Description:
*Precision Ground 0-1 Gage Stock 18" Length *0-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450?_1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450?_1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125?_150?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 2.4200

$163.62

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

36 x 1-1/4 x 6 - Oil Hardening Flat Stock

Item #: LY4054526
Manufacturer: Starrett
Mfg #: 54526

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: O-1 *Thick: 1-1/4 *Width: 6

Description:
*Precision Ground 0-1 Gage Stock 36" Length *O-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 77.3200 *Addl Fee Over 70lb - $19.00 per item

$1,453.13

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

36 x 3/4 x 10 - Oil Hardening Flat Stock

Item #: LY4054489
Manufacturer: Starrett
Mfg #: 54489

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: O-1 *Thick: 3/4 *Width: 10

Description:
*Precision Ground 0-1 Gage Stock 36" Length *O-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 77.3100 *Addl Fee Over 70lb - $19.00 per item

$1,706.27

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

5/8 x 12 x 36 - 496 Oil Hardening Precsision Ground Flat Stock

Item #: LY4057242
Manufacturer: Starrett
Mfg #: 57242

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: O-1 *Thick: 5/8 *Width: 12

Description:
*AISI 01 oil hardening tool steel. Standard size: +/-.001" thickness tolerance *Dimensionally stable -- can be used for intricate work including thin sections, with a minimum danger of cracking *Ground straight and parallel

Shipping Info:
*Actual Weight - 76.4900 *Addl Fee Over 70lb - $19.00 per item

$1,715.51

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1 x 8 x 36 - Oversize Air Hardening Flat Stock

Item #: LY4657466
Manufacturer: Starrett
Mfg #: 57466

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: A-2 *Thick: 1 *Width: 8

Description:
*499 s a A-2 5% chromium air hardening steel with high wear and abrasion resistance *Oversize: +.010"/.015" thickness tolerance *Maintains close dimensional accuracy throughout the heat treating process *The 5% chromium content makes this steel especially desirable for punches and dies to be used in long production runs since it gives the tools far longer life. *Up to 50% more pieces per sharpening can be produced than with oil hardening steel *High wear resistance is also ideal for punches and dies to stamp silicon, stainless steels, monel metal and other types of abrasive material *Maintains close dimensional accuracy throughout the heat treating process. The wide 75? hardening range make this virtually foolproof *Full-length identification eliminates confusion with other steels *Furnished in 18" and 36" lengths, ground straight and parallel

Shipping Info:
*Actual Weight - 81.5900 *Addl Fee Over 70lb - $19.00 per item

$2,610.47

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

36 x 1 x 10 - Oil Hardening Flat Stock

Item #: LY4054512
Manufacturer: Starrett
Mfg #: 54512

Technical Specifications:
*Brand Name: Starrett *Length: 36 *Material: O-1 *Thick: 1 *Width: 10

Description:
*Precision Ground 0-1 Gage Stock 36" Length *O-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 103.0800 *Addl Fee Over 70lb - $19.00 per item

$2,055.74

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

36 x 1-1/2 x 10 - Oil Hardening Flat Stock

Item #: LY5113210
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 36 *Material: O-1 *Thick: 1-1/2 *Width: 10

Description:
*Precision Ground 0-1 Gage Stock 36" Length *O-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Commercial Truck - Call for Shipping Charges *Actual Weight - 165.2900

$3,377.02

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

1-1/4 x 12 x 24 - 498 Low Carbon Precision Ground Flat Stock

Item #: LY8057257
Manufacturer: Starrett
Mfg #: 57257

Technical Specifications:
*Brand Name: Starrett *Length: 24 *Material: LC *Thick: 1-1/4 *Width: 12

Description:
*Substantial cost reductions over tool steel ground flat stock. There are savings up to 60% because this is a low carbon steel and furnished in 24" lengths. This means that you get one-third more steel at less cost * Ideal for a wide variety of parts that don't require more expensive heat treated steels, such as stripper plates, jigs, fixtures, machine and component parts, templates, etc. *This steel can be carburized or case hardened. After hardening, its physical properties, especially tensile strength, yield point, and Brinell hardness, are substantially higher. *Furnished in 24" (610mm) lengths, ground straight and parallel

Shipping Info:
*Actual Weight - 101.9900 *Addl Fee Over 70lb - $19.00 per item

$1,588.42

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It