Workholding - Clamping & Fixturing - Flat Stock & Shims - Flat Stock - (3617 Products)
7/8 x 2 x 18 - Oversize Air Hardening Flat Stock
Item #: LY4657639
Manufacturer: Starrett
Mfg #: 57639
Technical Specifications:
*Brand Name: Starrett
*Length: 18
*Material: A-2
*Thick: 7/8
*Width: 2
Description:
*499 s a A-2 5% chromium air hardening steel with high wear and abrasion resistance
*Oversize: +.010"/.015" thickness tolerance
*Maintains close dimensional accuracy throughout the heat treating process
*The 5% chromium content makes this steel especially desirable for punches and dies to be used in long production runs since it gives the tools far longer life.
*Up to 50% more pieces per sharpening can be produced than with oil hardening steel
*High wear resistance is also ideal for punches and dies to stamp silicon, stainless steels, monel metal and other types of abrasive material
*Maintains close dimensional accuracy throughout the heat treating process. The wide 75? hardening range make this virtually foolproof
*Full-length identification eliminates confusion with other steels
*Furnished in 18" and 36" lengths, ground straight and parallel
Shipping Info:
*Actual Weight - 8.9200
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
36 x 1/16 x 2 - Oil Hardening Flat Stock
Item #: LY5100407
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 36
*Material: O-1
*Thick: 1/16
*Width: 2
Description:
*Precision Ground 0-1 Gage Stock 36" Length
*O-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - .9800
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
36 x 1-1/2 x 2 - Oil Hardening Flat Stock
Item #: LY5113202
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 36
*Material: O-1
*Thick: 1-1/2
*Width: 2
Description:
*Precision Ground 0-1 Gage Stock 36" Length
*O-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 31.2700
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1-1/2 x 4 x 24 - 498 Low Carbon Precision Ground Flat Stock
Item #: LY8055071
Manufacturer: Starrett
Mfg #: 55071
Technical Specifications:
*Brand Name: Starrett
*Length: 24
*Material: LC
*Thick: 1-1/2
*Width: 4
Description:
*Substantial cost reductions over tool steel ground flat stock. There are savings up to 60% because this is a low carbon steel and furnished in 24" lengths. This means that you get one-third more steel at less cost
* Ideal for a wide variety of parts that don't require more expensive heat treated steels, such as stripper plates, jigs, fixtures, machine and component parts, templates, etc.
*This steel can be carburized or case hardened. After hardening, its physical properties, especially tensile strength, yield point, and Brinell hardness, are substantially higher.
*Furnished in 24" (610mm) lengths, ground straight and parallel
Shipping Info:
*Actual Weight - 40.8000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
36 x 5/16 x 4 - Oversize Oil Hardening Flat Stock
Item #: LY4156843
Manufacturer: Starrett
Mfg #: 56843
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: O-1
*Thick: 5/16
*Width: 4
Description:
*Oversize 0-1 Oil Hardening Ground Flat Stock
*Flat Ground Stock is manufactured from fine grain tool steel, electrically melted from high grade materials to close limits of analysis
*Ideal for the manufacture of dies, gages, punches, templates, jigs and precision tools
*Width +.010/.015
*Thickness +10.010/.015
*Squareness edge to surface .003 per inch of thickness
*Finish 10-25 micro inches
Shipping Info:
*Actual Weight - 13.3900
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
36 x 5/8 x 10 - Oil Hardening Flat Stock
Item #: LY4054475
Manufacturer: Starrett
Mfg #: 54475
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: O-1
*Thick: 5/8
*Width: 10
Description:
*Precision Ground 0-1 Gage Stock 36" Length
*O-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 49.7600
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
36 x 5/16 x 3 - Oversize Oil Hardening Flat Stock
Item #: LY4156842
Manufacturer: Starrett
Mfg #: 56842
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: O-1
*Thick: 5/16
*Width: 3
Description:
*Oversize 0-1 Oil Hardening Ground Flat Stock
*Flat Ground Stock is manufactured from fine grain tool steel, electrically melted from high grade materials to close limits of analysis
*Ideal for the manufacture of dies, gages, punches, templates, jigs and precision tools
*Width +.010/.015
*Thickness +10.010/.015
*Squareness edge to surface .003 per inch of thickness
*Finish 10-25 micro inches
Shipping Info:
*Actual Weight - 13.4400
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1-1/2 x 3-1/2 x 24 - 498 Low Carbon Precision Ground Flat Stock
Item #: LY8055070
Manufacturer: Starrett
Mfg #: 55070
Technical Specifications:
*Brand Name: Starrett
*Length: 24
*Material: LC
*Thick: 1-1/2
*Width: 3-1/2
Description:
*Substantial cost reductions over tool steel ground flat stock. There are savings up to 60% because this is a low carbon steel and furnished in 24" lengths. This means that you get one-third more steel at less cost
* Ideal for a wide variety of parts that don't require more expensive heat treated steels, such as stripper plates, jigs, fixtures, machine and component parts, templates, etc.
*This steel can be carburized or case hardened. After hardening, its physical properties, especially tensile strength, yield point, and Brinell hardness, are substantially higher.
*Furnished in 24" (610mm) lengths, ground straight and parallel
Shipping Info:
*Actual Weight - 35.7000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
36 x 5/8 x 8 - Oil Hardening Flat Stock
Item #: LY4054474
Manufacturer: Starrett
Mfg #: 54474
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: O-1
*Thick: 5/8
*Width: 8
Description:
*Precision Ground 0-1 Gage Stock 36" Length
*O-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 44.2400
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
18 x 1/2 x 1 - Oversize Oil Hardening Flat Stock
Item #: LY4157016
Manufacturer: Starrett
Mfg #: 57016
Technical Specifications:
*Brand Name: Starrett
*Length: 18
*Material: O-1
*Thick: 1/2
*Width: 1
Description:
*Oversize 0-1 Oil Hardening Ground Flat Stock
*Flat Ground Stock is manufactured from fine grain tool steel, electrically melted from high grade materials to close limits of analysis
*Ideal for the manufacture of dies, gages, punches, templates, jigs and precision tools
*Width +.010/.015
*Thickness +10.010/.015
*Squareness edge to surface .003 per inch of thickness
*Finish 10-25 micro inches
Shipping Info:
*Actual Weight - 2.6700
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
36 x 3/8 x 3/8 - Oversize Oil Hardening Flat Stock
Item #: LY652401
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 36
*Material: O-1
*Thick: 3/8
*Width: 3/8
Description:
*Oversize 0-1 Oil Hardening Ground Flat Stock
*Flat Ground Stock is manufactured from fine grain tool steel, electrically melted from high grade materials to close limits of analysis
*Ideal for the manufacture of dies, gages, punches, templates, jigs and precision tools
*Width +.010/.015
*Thickness +10.010/.015
*Squareness edge to surface .003 per inch of thickness
*Finish 10-25 micro inches
Shipping Info:
*Actual Weight - 1.5500
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
18 x 3/8 x 3-1/2 - Oversize Oil Hardening Flat Stock
Item #: LY602412
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 18
*Material: O-1
*Thick: 3/8
*Width: 3-1/2
Description:
*Oversize 0-1 Oil Hardening Ground Flat Stock
*Flat Ground Stock is manufactured from fine grain tool steel, electrically melted from high grade materials to close limits of analysis
*Ideal for the manufacture of dies, gages, punches, templates, jigs and precision tools
*Width +.010/.015
*Thickness +10.010/.015
*Squareness edge to surface .003 per inch of thickness
*Finish 10-25 micro inches
Shipping Info:
*Actual Weight - 7.0100
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
36 x 1/16 x 1-1/4 - Air Hardening Flat Stock
Item #: LY56404
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 36
*Material: A-2
*Thick: 1/16
*Width: 1-1/4
Description:
*A-2 Air Hardening Ground Flat Stock 36" Length
*Made from fine grain, electric furnace air-hardening, 5 chrome tool steel
*Has excellent wear and abrasion resistance properties
*Furnished with a fully spheroidized structure and is 100 free of decarb and other surface imperfections.
*Low sulphur content makes it non-freemachining.
*HEAT TREATMENT: Preheat thoroughly at 1450?F, then raise to hardening temperature 1725? _ 1800?F and soak uniformly. For larger sections, use high side; for thin or smaller sections, use low side. Quench in still air or dry air blast at 125? _ 175?F, then Temper Immediately.
*Tolerance Thickness ±.001" Width +.000/.005"
*Larger Sizes A-2 available thru 1" thickness
*Oversize tolerances available thru 2" thickness
*Many other types of gage stock available
*Modified Nutec 42
*A-6 Diecrat
*D-2 Aristocrat
*S-7
*C-1018 Marshallcrat low carbon
Shipping Info:
*Actual Weight - .8100
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
36 x 5/32 x 3 - Air Hardening Flat Stock
Item #: LY561010
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 36
*Material: A-2
*Thick: 5/32
*Width: 3
Description:
*A-2 Air Hardening Ground Flat Stock 36" Length
*Made from fine grain, electric furnace air-hardening, 5 chrome tool steel
*Has excellent wear and abrasion resistance properties
*Furnished with a fully spheroidized structure and is 100 free of decarb and other surface imperfections.
*Low sulphur content makes it non-freemachining.
*HEAT TREATMENT: Preheat thoroughly at 1450?F, then raise to hardening temperature 1725? _ 1800?F and soak uniformly. For larger sections, use high side; for thin or smaller sections, use low side. Quench in still air or dry air blast at 125? _ 175?F, then Temper Immediately.
*Tolerance Thickness ±.001" Width +.000/.005"
*Larger Sizes A-2 available thru 1" thickness
*Oversize tolerances available thru 2" thickness
*Many other types of gage stock available
*Modified Nutec 42
*A-6 Diecrat
*D-2 Aristocrat
*S-7
*C-1018 Marshallcrat low carbon
Shipping Info:
*Actual Weight - 4.8400
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
36 x 3/8 x 1/2 - Oversize Oil Hardening Flat Stock
Item #: LY652402
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 36
*Material: O-1
*Thick: 3/8
*Width: 1/2
Description:
*Oversize 0-1 Oil Hardening Ground Flat Stock
*Flat Ground Stock is manufactured from fine grain tool steel, electrically melted from high grade materials to close limits of analysis
*Ideal for the manufacture of dies, gages, punches, templates, jigs and precision tools
*Width +.010/.015
*Thickness +10.010/.015
*Squareness edge to surface .003 per inch of thickness
*Finish 10-25 micro inches
Shipping Info:
*Actual Weight - 2.0500
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
36 x 1-1/8 x 1-1/2 - Oil Hardening Flat Stock
Item #: LY5110801
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 36
*Material: O-1
*Thick: 1-1/8
*Width: 1-1/2
Description:
*Precision Ground 0-1 Gage Stock 36" Length
*O-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 17.7000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
18 x 7/64 x 4 - Oil Hardening Flat Stock
Item #: LY4053997
Manufacturer: Starrett
Mfg #: 53997
Technical Specifications:
*Brand Name: Starrett
*Length: 18
*Material: O-1
*Thick: 7/64
*Width: 4
Description:
*Precision Ground 0-1 Gage Stock 18" Length
*0-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450?_1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450?_1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125?_150?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 2.2600
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
18 x 1/2 x 3-1/2 - Oversize Oil Hardening Flat Stock
Item #: LY603210
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 18
*Material: O-1
*Thick: 1/2
*Width: 3-1/2
Description:
*Oversize 0-1 Oil Hardening Ground Flat Stock
*Flat Ground Stock is manufactured from fine grain tool steel, electrically melted from high grade materials to close limits of analysis
*Ideal for the manufacture of dies, gages, punches, templates, jigs and precision tools
*Width +.010/.015
*Thickness +10.010/.015
*Squareness edge to surface .003 per inch of thickness
*Finish 10-25 micro inches
Shipping Info:
*Actual Weight - 9.2800
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
24 x 3/32 x 2 - Low Carbon Flat Stock
Item #: LY8000785
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 24
*Material: Low Carbon
*Thick: 3/32
*Width: 2
Description:
*Low-Carbon 24" Length Ground Flat Stock
*A fine-grained, vacuum-degassed carbon steel
*Easily machined, has excellent weldability and responds uniformly to case hardening
*Manganese content provides greater strength and hardness compared to many other carbon steels
*Often used in its natural state for such applications as backup plate, stripper plates, punch pads and machine parts
*Used for jigs, fixtures, cams and patterns
*Hardening: CARBURIZING: For maximum depth of hardening, 1/21", hold in carburizing salt at 1700?F for 3 hours. CASE HARDENING: Hold in sodium cyanide salt bath at 1500?F for 30 minutes. Maximum case is .006"
Shipping Info:
*Actual Weight - 1.2900
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
18 x 3/8 x 1-1/4 - Air Hardening Flat Stock
Item #: LY552405
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 18
*Material: A-2
*Thick: 3/8
*Width: 1-1/4
Description:
*A-2 Air Hardening Ground Flat Stock 18" Length
*Made from fine grain, electric furnace air-hardening, 5 chrome tool steel
*Has excellent wear and abrasion resistance properties
*Furnished with a fully spheroidized structure and is 100 free of decarb and other surface imperfections.
*Low sulphur content makes it non-freemachining.
*HEAT TREATMENT: Preheat thoroughly at 1450?F, then raise to hardening temperature 1725? _ 1800?F and soak uniformly. For larger sections, use high side; for thin or smaller sections, use low side. Quench in still air or dry air blast at 125? _ 175?F, then Temper Immediately.
*Tolerance Thickness ±.001" Width +.000/.005"
*Larger Sizes A-2 available thru 1" thickness
*Oversize tolerances available thru 2" thickness
*Many other types of gage stock available
*Modified Nutec 42
*A-6 Diecrat
*D-2 Aristocrat
*S-7
*C-1018 Marshallcrat low carbon
Shipping Info:
*Actual Weight - 2.4200
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It